I've purchsed 5 g729 licenses from digium, but am a little confused about why things are acting the way they are.
When I do show g729 I see: 0/0 encoders/decoders of 5 licensed channels are currently in use My sip.conf starts out: [general] disallow=all allow=ulaw allow=g726 then my hosts look like this: [6016716] username=6016716 accountcode=75415 type=friend secret=obsurified qualify=yes port=5060 nat=yes [EMAIL PROTECTED] host=dynamic dtmfmode=rfc2833 context=from-internal canreinvite=no callerid="Test VoIP Accounts" <6016716> All works fine, however if I make a change so it reads: [6016716] disallow=all allow=g729 username=6016716 accountcode=75415 type=friend secret=obsurified qualify=yes port=5060 nat=yes [EMAIL PROTECTED] host=dynamic dtmfmode=rfc2833 context=from-internal canreinvite=no callerid="Test VoIP Accounts" <6016716> and reload, strange things begin to happen. A show g729 shows this: 5/0 encoders/decoders of 5 licensed channels are currently in use and suddenly I can not hear anything if I try to make a call. From observation, it almost seems like other units on the network are using the g729 codecs, but doesn't my sip.conf prohibit g729 unless expressly allowed?! Why would allowing g729 under one extension allow everyone else to suddenly start using g729? _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
