Hi,
I am using debian 4.0 with version 2.6.18-4-686
I have downloaded the required files form site
asterisk-1.2.24.tar.gz
libmfcr2-0.0.3-1.4.tar.bz2
libsupertone-0.0.2.tar.gz
libunicall-0.0.3-1.4.tar.bz2
spandsp-20060903.tar.gz
I downloaded and installed the files in the follwing sequence
spandsp
libsupertone
libunicall
libmfcr2-0.0.3
then copying the chan_unicall.c and channels_Makefile.patch to
channels subdirectory of asterisk-1.2.24 After building and installing
asterisk
When I run 'asterisk -vvvgc' command it doesnot find dtmf_put during
linking time. So, I
commented the dtmf_put function in chan_unicall.c. Than every thing worked
fine...
Can any body tell me about how to configure unicall.conf for
incoming and outgoing call
As asterisk is running on one end and E1 card running application (i.e
dialogic) is running at other end.
So, through properly configuring unicall.conf I want to communicate
through
E1 card running a[pplication for both incoming and outgoing calls.
I am using the following configuration
-> zaptel.conf
span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
-> unicall.conf
loglevel=255
protocolclass=mfcr2
protocolvariant=in,20,4
protocolend=cpe
group=1
context=from-zaptel
channel=1-15
channel=17-31
-> extensions.conf
[from-zaptel]
exten=>113,1,Dial(UniCall/g1/114,,T)
In sip.conf dialing m/c information with context same as above is put.
On dialing through sip phone from one machine, it is going to asterisk
PBX,
their it is giving error message
dial_exec_full: unable to crate channel of type
unicall(cause 0)
Everyone is busy/congested
Auto fall through channel.status is 'CHANUNAVAIL'
Can anybody will help me resolving this error
Thanks and Regards
sanchal
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
