Dear All,
I'm integrating avaya commuication manager difinity ver 1.0 with asterisk
using B2B E1. following are the details of my H/W, zaptel configs and
software installed.
Digium TE110p
asterisk 1.2.19
cent OS 4.4
zaptel 1.2.18
libpri 1.2.4
etc/zaptel.conf
span=1,0,0,cas,hdb3
bchan=1-15,17-31
dchan=16
when i ztcfg -vvv im having this error message and the E1 is not getting up.
"cas signalling on span1 conflicts with HDLC with FCS on channel 16"
The switchtype and signalling im using is national, pri_cpe
I'm attaching the avaya config details for more information.
Please help me to sorted out this problem.
-
Thanks & Regards,
Vidura Senadeera,
Sri Lanka.
Tel - +94114520036
Mobile - +94777766596
SIGNALING GROUP
Group Number: 1 Group Type: isdn-pri
Associated Signaling? y Max number of NCA TSC: 0
Primary D-Channel: 01B0216 Max number of CA TSC: 0
Trunk Group for NCA TSC:
Trunk Group for Channel Selection: X-Mobility/Wireless Type: NONE
Supplementary Service Protocol: a
DS1 CIRCUIT PACK
Location: 01B02 Name: ZTE 1
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: isdn-pri
Connect: network
TN-C7 Long Timers? n Country Protocol: 7
Interworking Message: PROGress
Interface Companding: alaw CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz
Slip Detection? y Near-end CSU Type: other
Echo Cancellation? n
TRUNK GROUP
Group Number: 1 Group Type: isdn CDR Reports: y
Group Name: OUTSIDE CALL COR: 14 TN: 1 TAC: 801
Direction: two-way Outgoing Display? n Carrier Medium: PRI/BRI
Dial Access? y Busy Threshold: 99 Night Service:
Queue Length: 0
Service Type: public-ntwrk Auth Code? n TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send National IEs: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc
Trunk Hunt: cyclical
Digital Loss Group: 13
Calling Number - Delete: Insert: Numbering Format:
Bit Rate: 1200 Synchronization: sync Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0
TRUNK FEATURES
ACA Assignment? n Measured: none Wideband Support? n
Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member:
Send Name: n Send Calling Number: y
Used for DCS? n
Suppress # Outpulsing? n Numbering Format: public
Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider
Replace Restricted Numbers? y
Replace Unavailable Numbers? y
Send Connected Number: y
Send UUI IE? y
Send UCID? n
Send Codeset 6/7 LAI IE? y Ds1 Echo Cancellation? n
US NI Delayed Calling Name Update? n
SBS? n Network (Japan) Needs Connect Before Disconnect? n
DS1 CIRCUIT PACK
Location: 01B01 Name: ZTE 4
Bit Rate: 2.048 Line Coding: hdb3
Signaling Mode: isdn-pri
Connect: network
TN-C7 Long Timers? n Country Protocol: 7
Interworking Message: PROGress
Interface Companding: alaw CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz
Slip Detection? y Near-end CSU Type: other
Echo Cancellation? n
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
