Maybe you want to provide a full log (including call of the first channel
and the hangup) to my personal mail?
I just added an attachment to this mail.
Thanks a lot :-)
P.S.: this log was generated with verbosity to 5 and with capi debug
_________________________________________________________________
Découvrez le Blog heroic Fantaisy d'Eragon!
http://eragon-heroic-fantasy.spaces.live.com/
*CLI> CONNECT_IND ID=002 #0x168a LEN=0041
Controller/PLCI/NCCI = 0x401
CIPValue = 0x10
CalledPartyNumber = <81>123
CallingPartyNumber = <00 83>107
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = <91 81>
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
-- CONNECT_IND (PLCI=0x401,DID=123,CID=107,CIP=0x10,CONTROLLER=0x1)
> contr1#02: msn='*' DNID='123' DID
== contr1#02: setting format alaw - 0x8 (alaw)
== contr1#02: Incoming call '107' -> '123'
INFO_IND ID=002 #0x168b LEN=0019
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x70
InfoElement = <81>123
*CLI> INFO_IND ID=002 #0x3530 LEN=0036
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x1c
InfoElement = <91 a1 12 02 01>t<02 01 22>0<0a a1
05>0<03 02 01 00 82 01 01>
INFO_RESP ID=002 #0x3530 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element FACILITY
INFO_IND ID=002 #0x3531 LEN=0017
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x1e
InfoElement = <81 88>
INFO_RESP ID=002 #0x3531 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element PI 81 88
> contr1#01: In-band information available
INFO_IND ID=002 #0x3532 LEN=0017
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x8
InfoElement = <80 90>
INFO_RESP ID=002 #0x3532 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element CAUSE 80 90
INFO_IND ID=002 #0x3533 LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x8045
InfoElement = default
INFO_RESP ID=002 #0x3533 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element DISCONNECT
-- contr1#01: Disconnect case 1
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Hangup (1) ]
[contr1#01]
== contr1#01: CAPI Hangingup for PLCI=0x301 in state 2
-- contr1#01: activehangingup (cause=16) for PLCI=0x301
DISCONNECT_B3_REQ ID=002 #0x31d3 LEN=0013
Controller/PLCI/NCCI = 0x260301
NCPI = default
== Spawn extension (standardtelephonique, 103, 2) exited non-zero on
'CAPI/contr1#02/123-10'
== contr1#02: CAPI Hangingup for PLCI=0x401 in state 2
-- contr1#02: activehangingup (cause=16) for PLCI=0x401
DISCONNECT_B3_REQ ID=002 #0x31d4 LEN=0013
Controller/PLCI/NCCI = 0x250401
NCPI = default
> CAPI devicestate requested for contr1#01/103
> CAPI devicestate requested for contr1#01/103
> CAPI devicestate requested for contr1#02/123
> CAPI devicestate requested for contr1#02/123
DISCONNECT_B3_CONF ID=002 #0x31d3 LEN=0014
Controller/PLCI/NCCI = 0x260301
Info = 0x0
DISCONNECT_B3_CONF ID=002 #0x31d4 LEN=0014
Controller/PLCI/NCCI = 0x250401
Info = 0x0
DISCONNECT_B3_IND ID=002 #0x3535 LEN=0015
Controller/PLCI/NCCI = 0x260301
Reason_B3 = 0x0
NCPI = default
DISCONNECT_B3_RESP ID=002 #0x3535 LEN=0012
Controller/PLCI/NCCI = 0x260301
DISCONNECT_REQ ID=002 #0x31d5 LEN=0013
Controller/PLCI/NCCI = 0x301
AdditionalInfo = default
DISCONNECT_B3_IND ID=002 #0x3536 LEN=0015
Controller/PLCI/NCCI = 0x250401
Reason_B3 = 0x0
NCPI = default
DISCONNECT_B3_RESP ID=002 #0x3536 LEN=0012
Controller/PLCI/NCCI = 0x250401
DISCONNECT_REQ ID=002 #0x31d6 LEN=0013
Controller/PLCI/NCCI = 0x401
AdditionalInfo = default
DISCONNECT_CONF ID=002 #0x31d5 LEN=0014
Controller/PLCI/NCCI = 0x301
Info = 0x0
INFO_IND ID=002 #0x3537 LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x805a
InfoElement = default
INFO_RESP ID=002 #0x3537 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element RELEASE COMPLETE
DISCONNECT_IND ID=002 #0x3539 LEN=0014
Controller/PLCI/NCCI = 0x301
Reason = 0x3490
DISCONNECT_RESP ID=002 #0x3539 LEN=0012
Controller/PLCI/NCCI = 0x301
> contr1#01: CAPI INFO 0x3490: Normal call clearing
== contr1#01: Interface cleanup PLCI=0x301
DISCONNECT_CONF ID=002 #0x31d6 LEN=0014
Controller/PLCI/NCCI = 0x401
Info = 0x0
INFO_IND ID=002 #0x353a LEN=0036
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x1c
InfoElement = <91 a1 12 02 01>u<02 01 22>0<0a a1
05>0<03 02 01 00 82 01 01>
INFO_RESP ID=002 #0x353a LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element FACILITY
INFO_IND ID=002 #0x353b LEN=0017
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x8
InfoElement = <80 90>
INFO_RESP ID=002 #0x353b LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element CAUSE 80 90
INFO_IND ID=002 #0x353c LEN=0015
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x804d
InfoElement = default
INFO_RESP ID=002 #0x353c LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element RELEASE
DISCONNECT_IND ID=002 #0x353e LEN=0014
Controller/PLCI/NCCI = 0x401
Reason = 0x3490
DISCONNECT_RESP ID=002 #0x353e LEN=0012
Controller/PLCI/NCCI = 0x401
> contr1#02: CAPI INFO 0x3490: Normal call clearing
== contr1#02: Interface cleanup PLCI=0x401
INFO_RESP ID=002 #0x168b LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element CALLED PARTY NUMBER
-- contr1#02: Updated channel name: CAPI/contr1#02/123-10
-- contr1#02: CAPI/contr1#02/123-10: 123 matches in context toto
> CAPI devicestate requested for contr1#02/123
== Started pbx on channel CAPI/contr1#02/123-10
INFO_IND ID=002 #0x168c LEN=0015
Controller/PLCI/NCCI = 0x401
InfoNumber = 0xa1
InfoElement = default
INFO_RESP ID=002 #0x168c LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element Sending Complete
INFO_IND ID=002 #0x168d LEN=0016
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x18
InfoElement = <8a>
INFO_RESP ID=002 #0x168d LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element CHANNEL IDENTIFICATION 8a
INFO_IND ID=002 #0x168e LEN=0015
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x8005
InfoElement = default
INFO_RESP ID=002 #0x168e LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element SETUP
> contr1#02: IE SETUP / SENDING-COMPLETE already received.
-- Executing [EMAIL PROTECTED]:1] NoOp("CAPI/contr1#02/123-10", "<> a compose le
<123> depuis le poste <107> de type <CAP>") in new stack
-- Executing [EMAIL PROTECTED]:2] Read("CAPI/contr1#02/123-10",
"numero|demandeNumero") in new stack
== contr1#02: Answering for 123
CONNECT_RESP ID=002 #0x168a LEN=0039
Controller/PLCI/NCCI = 0x401
Reject = 0x0
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
GlobalConfiguration = default
ConnectedNumber = <00 80>123
ConnectedSubaddress = default
LLC = default
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
> CAPI devicestate requested for contr1#02/123
-- <CAPI/contr1#02/123-10> Playing 'demandeNumero' (language 'de')
CONNECT_ACTIVE_IND ID=002 #0x1690 LEN=0015
Controller/PLCI/NCCI = 0x401
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default
CONNECT_ACTIVE_RESP ID=002 #0x1690 LEN=0012
Controller/PLCI/NCCI = 0x401
CONNECT_B3_IND ID=002 #0x1691 LEN=0013
Controller/PLCI/NCCI = 0x250401
NCPI = default
CONNECT_B3_RESP ID=002 #0x1691 LEN=0015
Controller/PLCI/NCCI = 0x250401
Reject = 0x0
NCPI = default
CONNECT_B3_ACTIVE_IND ID=002 #0x1692 LEN=0013
Controller/PLCI/NCCI = 0x250401
NCPI = default
CONNECT_B3_ACTIVE_RESP ID=002 #0x1692 LEN=0012
Controller/PLCI/NCCI = 0x250401
-- User entered '103'
-- Executing [EMAIL PROTECTED]:3] NoOp("CAPI/contr1#02/123-10", "Voici le numero
: 103") in new stack
-- Executing [EMAIL PROTECTED]:4] Goto("CAPI/contr1#02/123-10",
"standardtelephonique|103|1") in new stack
-- Goto (standardtelephonique,103,1)
-- Executing [EMAIL PROTECTED]:1] NoOp("CAPI/contr1#02/123-10",
"<> a compose le <123> depuis le poste <107> de type < - 0>") in new stack
-- Executing [EMAIL PROTECTED]:2] Dial("CAPI/contr1#02/123-10",
"CAPI/contr1/b:103||tT") in new stack
> data = contr1/b:103 format=8
> parsed dialstring: 'contr1' 'b' '103' ''
> capi request controller = 1
== contr1#01: setting format alaw - 0x8 (alaw)
> parsed dialstring: 'contr1' 'b' '103' ''
> capi: peerlink -1 allocated, peer is unlinked
== contr1#01: Call CAPI/contr1#01/103-11 (pres=0x03, ton=0x00)
CONNECT_REQ ID=002 #0x13e4 LEN=0047
Controller/PLCI/NCCI = 0x1
CIPValue = 0x1
CalledPartyNumber = <80>103
CallingPartyNumber = <00 83>b
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
GlobalConfiguration = default
BC = default
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <00 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
-- Called contr1/b:103
> CAPI devicestate requested for contr1#01/103
CONNECT_CONF ID=002 #0x13e4 LEN=0014
Controller/PLCI/NCCI = 0x301
Info = 0x0
-- contr1#01: received CONNECT_CONF PLCI = 0x301
INFO_IND ID=002 #0x1727 LEN=0017
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x1e
InfoElement = <81 88>
INFO_RESP ID=002 #0x1727 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element PI 81 88
> contr1#01: In-band information available
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control '14'
(14) ] [contr1#01]
INFO_IND ID=002 #0x1728 LEN=0016
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x18
InfoElement = <89>
INFO_RESP ID=002 #0x1728 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element CHANNEL IDENTIFICATION 89
INFO_IND ID=002 #0x1729 LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x800d
InfoElement = default
INFO_RESP ID=002 #0x1729 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element SETUP ACK
-- CAPI/contr1#01/103-11 is making progress passing it to
CAPI/contr1#02/123-10
== contr1#02: Requested PROGRESS-Indication for CAPI/contr1#02/123-10
INFO_IND ID=002 #0x172b LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x8002
InfoElement = default
INFO_RESP ID=002 #0x172b LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element CALL PROCEEDING
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control '15'
(15) ] [contr1#01]
-- CAPI/contr1#01/103-11 is proceeding passing it to
CAPI/contr1#02/123-10
== contr1#02: Requested PROCEEDING-Indication for CAPI/contr1#02/123-10
INFO_IND ID=002 #0x173a LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x8001
InfoElement = default
INFO_RESP ID=002 #0x173a LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element ALERTING
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Ringing (3) ]
[contr1#01]
-- CAPI/contr1#01/103-11 is ringing
== contr1#02: Requested RINGING-Indication for CAPI/contr1#02/123-10
-- contr1#02: attempting ALERT in state 2
> CAPI devicestate requested for contr1#01/103
INFO_IND ID=002 #0x1853 LEN=0020
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x29
InfoElement = <07 09 06 12 03>
INFO_RESP ID=002 #0x1853 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element Date/Time 07/09/06 18:03
INFO_IND ID=002 #0x1854 LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x8007
InfoElement = default
INFO_RESP ID=002 #0x1854 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element CONNECT
CONNECT_ACTIVE_IND ID=002 #0x1856 LEN=0020
Controller/PLCI/NCCI = 0x301
ConnectedNumber = <00 83>103
ConnectedSubaddress = default
LLC = default
CONNECT_ACTIVE_RESP ID=002 #0x1856 LEN=0012
Controller/PLCI/NCCI = 0x301
CONNECT_B3_REQ ID=002 #0x14fc LEN=0013
Controller/PLCI/NCCI = 0x301
NCPI = default
-- contr1#01: sent CONNECT_B3_REQ PLCI=0x301
CONNECT_B3_CONF ID=002 #0x14fc LEN=0014
Controller/PLCI/NCCI = 0x260301
Info = 0x0
CONNECT_B3_ACTIVE_IND ID=002 #0x1858 LEN=0013
Controller/PLCI/NCCI = 0x260301
NCPI = default
CONNECT_B3_ACTIVE_RESP ID=002 #0x1858 LEN=0012
Controller/PLCI/NCCI = 0x260301
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Answer (4) ]
[contr1#01]
-- CAPI/contr1#01/103-11 answered CAPI/contr1#02/123-10
== contr1#02: Requested Indication-STOP for CAPI/contr1#02/123-10
> CAPI devicestate requested for contr1#01/103
*CLI> INFO_IND ID=002 #0x3530 LEN=0036
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x1c
InfoElement = <91 a1 12 02 01>t<02 01 22>0<0a a1
05>0<03 02 01 00 82 01 01>
INFO_RESP ID=002 #0x3530 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element FACILITY
INFO_IND ID=002 #0x3531 LEN=0017
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x1e
InfoElement = <81 88>
INFO_RESP ID=002 #0x3531 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element PI 81 88
> contr1#01: In-band information available
INFO_IND ID=002 #0x3532 LEN=0017
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x8
InfoElement = <80 90>
INFO_RESP ID=002 #0x3532 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element CAUSE 80 90
INFO_IND ID=002 #0x3533 LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x8045
InfoElement = default
INFO_RESP ID=002 #0x3533 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element DISCONNECT
-- contr1#01: Disconnect case 1
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Hangup (1) ]
[contr1#01]
== contr1#01: CAPI Hangingup for PLCI=0x301 in state 2
-- contr1#01: activehangingup (cause=16) for PLCI=0x301
DISCONNECT_B3_REQ ID=002 #0x31d3 LEN=0013
Controller/PLCI/NCCI = 0x260301
NCPI = default
== Spawn extension (standardtelephonique, 103, 2) exited non-zero on
'CAPI/contr1#02/123-10'
== contr1#02: CAPI Hangingup for PLCI=0x401 in state 2
-- contr1#02: activehangingup (cause=16) for PLCI=0x401
DISCONNECT_B3_REQ ID=002 #0x31d4 LEN=0013
Controller/PLCI/NCCI = 0x250401
NCPI = default
> CAPI devicestate requested for contr1#01/103
> CAPI devicestate requested for contr1#01/103
> CAPI devicestate requested for contr1#02/123
> CAPI devicestate requested for contr1#02/123
DISCONNECT_B3_CONF ID=002 #0x31d3 LEN=0014
Controller/PLCI/NCCI = 0x260301
Info = 0x0
DISCONNECT_B3_CONF ID=002 #0x31d4 LEN=0014
Controller/PLCI/NCCI = 0x250401
Info = 0x0
DISCONNECT_B3_IND ID=002 #0x3535 LEN=0015
Controller/PLCI/NCCI = 0x260301
Reason_B3 = 0x0
NCPI = default
DISCONNECT_B3_RESP ID=002 #0x3535 LEN=0012
Controller/PLCI/NCCI = 0x260301
DISCONNECT_REQ ID=002 #0x31d5 LEN=0013
Controller/PLCI/NCCI = 0x301
AdditionalInfo = default
DISCONNECT_B3_IND ID=002 #0x3536 LEN=0015
Controller/PLCI/NCCI = 0x250401
Reason_B3 = 0x0
NCPI = default
DISCONNECT_B3_RESP ID=002 #0x3536 LEN=0012
Controller/PLCI/NCCI = 0x250401
DISCONNECT_REQ ID=002 #0x31d6 LEN=0013
Controller/PLCI/NCCI = 0x401
AdditionalInfo = default
DISCONNECT_CONF ID=002 #0x31d5 LEN=0014
Controller/PLCI/NCCI = 0x301
Info = 0x0
INFO_IND ID=002 #0x3537 LEN=0015
Controller/PLCI/NCCI = 0x301
InfoNumber = 0x805a
InfoElement = default
INFO_RESP ID=002 #0x3537 LEN=0012
Controller/PLCI/NCCI = 0x301
-- contr1#01: info element RELEASE COMPLETE
DISCONNECT_IND ID=002 #0x3539 LEN=0014
Controller/PLCI/NCCI = 0x301
Reason = 0x3490
DISCONNECT_RESP ID=002 #0x3539 LEN=0012
Controller/PLCI/NCCI = 0x301
> contr1#01: CAPI INFO 0x3490: Normal call clearing
== contr1#01: Interface cleanup PLCI=0x301
DISCONNECT_CONF ID=002 #0x31d6 LEN=0014
Controller/PLCI/NCCI = 0x401
Info = 0x0
INFO_IND ID=002 #0x353a LEN=0036
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x1c
InfoElement = <91 a1 12 02 01>u<02 01 22>0<0a a1
05>0<03 02 01 00 82 01 01>
INFO_RESP ID=002 #0x353a LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element FACILITY
INFO_IND ID=002 #0x353b LEN=0017
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x8
InfoElement = <80 90>
INFO_RESP ID=002 #0x353b LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element CAUSE 80 90
INFO_IND ID=002 #0x353c LEN=0015
Controller/PLCI/NCCI = 0x401
InfoNumber = 0x804d
InfoElement = default
INFO_RESP ID=002 #0x353c LEN=0012
Controller/PLCI/NCCI = 0x401
-- contr1#02: info element RELEASE
DISCONNECT_IND ID=002 #0x353e LEN=0014
Controller/PLCI/NCCI = 0x401
Reason = 0x3490
DISCONNECT_RESP ID=002 #0x353e LEN=0012
Controller/PLCI/NCCI = 0x401
> contr1#02: CAPI INFO 0x3490: Normal call clearing
== contr1#02: Interface cleanup PLCI=0x401
_______________________________________________
Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
