Hi,
I am attempting to setup an asterisk server, current specs:
CentOS release 5 (Final)
Asterisk 1.4.11
Asterisk-gui checked out from SVN last week
I started with a fairly basic setup involving one VOIP provider who
provided one dial in number, and a couple of handsets. Config files are
below. It was pretty much totally built by Asterisk-gui, except for the
fact I had to add "insecure=very" into users.conf in order to stop the
dialin from our provider presenting an authentication error. Advice on
any more correct approach would be appreciated, but is not the focus of
this post:
Users.conf
;several handsets setup like this...
[6001]
callwaiting = yes
context = numberplan-custom-1
email = [EMAIL PROTECTED]
fullname = Joshua Small
hasagent = yes
hasdirectory = yes
hasiax = no
hasmanager = no
hassip = yes
hasvoicemail = no
host = dynamic
mailbox = 6001
secret = XXXXX
threewaycalling = yes
registeriax = no
registersip = yes
canreinvite = no
nat = no
dtmfmode = rfc2833
vmsecret = 1234
;some PSTNS
[trunk_2]
callerid = asreceived
context = DID_trunk_2
group = 2
hasexten = no
hasiax = no
hassip = no
trunkname = Ports 1,2,3,4
trunkstyle = analog
zapchan = 1,2,3,4
;my IP trunk
[trunk_3]
allow = all
context = DID_trunk_3
dialformat = ${EXTEN:1}
hasexten = no
hasiax = no
hassip = yes
host = gw02.mytel.net.au
port = 5060
registeriax = no
registersip = yes
secret = XXXXXXXX
trunkname = Custom - MyTel2
trunkstyle = customvoip
username = XXXXXXXX
type = friend
nat = yes
;extensions.conf
[numberplan-custom-1]
plancomment = DialPlan1
include = default
include = parkedcalls
exten = _0XXXXX!,1,Macro(trunkdial,${trunk_3}/${EXTEN:1})
comment = _0XXXXX!,1,First,standard
;a failover to PSTN, not yet enabled
;exten = _0XXXXX!,2,Macro(trunkdial,${trunk_2}/0${EXTEN:1})
;comment = _0XXXXX!,1,First,standard
At this point, everything appears to work fine. We can make calls from
our several handsets using our voip link no problems.
We have two different accounts with our provider, the goal being certain
handsets will connect to this account and therefore be billed
separately. I haven't gotten as far as to add the extra handsets and set
an appropriate dialplan, all I did was add this to users.conf:
[trunk_extra]
allow = all
context = DID_trunk_3
dialformat = ${EXTEN:1}
hasexten = no
hasiax = no
hassip = yes
host = gw02.mytel.net.au
port = 5060
registeriax = no
registersip = yes
secret = XXXXXXXX
trunkname = Custom - MyTel Two
trunkstyle = customvoip
username = XXXXXXXXXX
type = friend
nat = yes
>From this point on, my existing handsets don't appear to be able to get
a line out. My console looks like this (from the first call out):
Connected to Asterisk 1.4.11 currently running on asterisk (pid = 31999)
-- Remote UNIX connection
Verbosity is at least 8
-- Executing [EMAIL PROTECTED]:1]
Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new
stack
-- Executing [EMAIL PROTECTED]:1] Dial("SIP/8001-b7d0bb20",
"SIP/trunk_3/0425298582") in new stack
-- Called trunk_3/0425298582
[Sep 13 20:42:16] WARNING[32011]: chan_sip.c:12016
handle_response_invite: Received response: "Forbidden" from '"Joshua
Small" <sip:[EMAIL PROTECTED]>;tag=as29bb274d'
-- SIP/trunk_3-097ac708 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [EMAIL PROTECTED]:2] Goto("SIP/8001-b7d0bb20",
"s-CONGESTION|1") in new stack
-- Goto (macro-trunkdial,s-CONGESTION,1)
-- Executing [EMAIL PROTECTED]:1]
NoOp("SIP/8001-b7d0bb20", "") in new stack
== Auto fallthrough, channel 'SIP/8001-b7d0bb20' status is
'CONGESTION'
Any advice on why our trunk_3 becomes congested, just because
trunk_extra is set to exist, is appreciated.
Joshua Small | Senior Network Engineer | VisiNet | P. +61 1300 887 959 |
www.visinet.com.au <http://www.visinet.com.au/>
This e-mail is intended for use by the named recipients only and
contains confidential information. Opinions and other information in
this message that pertain to the sender's employer and its products and
services represent the opinion of the sender and not necessarily those
of the employer.
_______________________________________________
Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
