On Thu, Sep 13, 2007 at 11:55:59PM -0700, Vieri wrote:
> Thank you,
> I did what you mentioned below.
> It seems that I'm getting a hangupcause of 0 which I
> believe is "not defined".
> Is Alcatel the first party that is trying to
> disconnect or is it Asterisk? (Not sure how to
> interpret the debug info I'm posting below)
>
> Whether it's Alcatel or Asterisk, what could be the
> actual cause? (or where should I start looking?)
>
> Thanks
>
> INF-VOIP*CLI> pri debug span 1
> Enabled debugging on span 1
> -- Executing NoOp("SIP/4053-083189e8", "[ALCATEL TEST] Start") in new
> stack
> -- Executing Dial("SIP/4053-083189e8", "Zap/g1/5900") in new stack
> 1 -- Making new call for cr 32781
> -- Requested transfer capability: 0x00 - SPEECH
> 1 > Protocol Discriminator: Q.931 (8) len=32
> 1 > Call Ref: len= 2 (reference 13/0xD) (Originator)
> 1 > Message type: SETUP (5)
> 1 > [04 03 80 90 a3]
> 1 > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> 1 > Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> 1 > Ext: 1 User information layer 1: A-Law (35)
> 1 > [18 04 e9 81 83 81]
> 1 > Channel ID (len= 6) [ Ext: 1 IntID: Explicit, PRI Spare: 0, Exclusive
> Dchan: 0
> 1 > ChanSel: Reserved
> 1 > Ext: 1 DS1 Identifier: 1
> 1 > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> 1 > Ext: 1 Channel: 1 ]
> 1 > [6c 06 21 80 34 30 35 33]
> 1 > Calling Number (len= 8) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> 1 > Presentation: Presentation permitted, user
> number not screened (0) '4053' ]
> 1 > [70 05 a1 35 39 30 30]
> 1 > Called Number (len= 7) [ Ext: 1 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '5900' ]
> 1 > [a1]
> 1 > Sending Complete (len= 1)
> -- Called g1/5900
> 1 < Protocol Discriminator: Q.931 (8) len=10
> 1 < Call Ref: len= 2 (reference 13/0xD) (Terminator)
> 1 < Message type: CALL PROCEEDING (2)
> 1 < [18 03 a9 83 81]
> 1 < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
> Dchan: 0
> 1 < ChanSel: Reserved
> 1 < Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> 1 < Ext: 1 Channel: 1 ]
> 1 -- Processing IE 24 (cs0, Channel Identification)
> -- Zap/1-1 is proceeding passing it to SIP/4053-083189e8
> 1 < Protocol Discriminator: Q.931 (8) len=5
> 1 < Call Ref: len= 2 (reference 13/0xD) (Terminator)
> 1 < Message type: ALERTING (1)
This is normal, right?
> -- Zap/1-1 is ringing
> -- Zap/1-1 is busy
Huh? why is Zap/1-1 suddenly busy?
> 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate
> Call Received
> 1 > Protocol Discriminator: Q.931 (8) len=9
> 1 > Call Ref: len= 2 (reference 13/0xD) (Originator)
> 1 > Message type: DISCONNECT (69)
> 1 > [08 02 81 90]
> 1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location: Private network serving the local user (1)
> 1 > Ext: 1 Cause: Normal Clearing (16), class = Normal
> Event (1) ]
So your side initiation disconnecting?
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
