Scott Moseman wrote: > Here's what I'm showing in the logs... > > [Sep 18 09:52:09] VERBOSE[2786] logger.c: == Registered file format > g729, extension(s) g729 > [Sep 18 09:52:09] VERBOSE[2786] logger.c: format_g729.so => (Raw G729 data) > [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: G.729 transcoding module > version 32, Copyright (C) 1999-2007 Digium, Inc. > [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: This module is supplied > under a commercial license granted by Digium, Inc. > [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: Please see the full > license text supplied by the accompanying > [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: "register" utility, or > ask for a copy from Digium. > [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: This product includes > software developed by the OpenSSL Project > [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: for use in the OpenSSL > Toolkit. (http://www.openssl.org/) > [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: Copyright (C) 1998-2006 > The OpenSSL Project > [Sep 18 09:52:09] VERBOSE[2786] logger.c: == G.729 Host-ID: x:x:x:etc > [Sep 18 09:52:09] WARNING[2786] codec_g729.c: Failed to initialize > G.729 copy protection! > [Sep 18 09:52:09] VERBOSE[2786] logger.c: codec_g729a.so => (Annex A/B > (floating point) G.729 Codec (optimized for i686)) > > Any ideas where this points me?
I hate to ask what may be a silly question, but have you purchased any G.729 licenses to use with the g.729 codec you downloaded? If you haven't registered codec_g729 yet, that would be why you are seeing this problem with codec_g729. Matthew Fredrickson > > Thanks, > Scott > > > > On 9/17/07, Scott Moseman <[EMAIL PROTECTED]> wrote: >> What's the best way to debug what's going on within Asterisk? >> I turned up the 'core debug', but that did not give me what I was >> hoping to find. I'm hoping to see some kind of error that explains >> why it will not pass through the g729 codec. >> >> Thanks, >> Scott >> >> >> On 9/14/07, Scott Moseman <[EMAIL PROTECTED]> wrote: >>> I have a fresh 1.4.10.1 installation that appears to have a problem >>> with g729 pass-through. I can see the gateway in question sending >>> an INVITE using g729b. However, the Asterisk is only sending g711 >>> in the INVITE to my Polycom phone. >>> >>> [gateway] >>> disallow=all >>> allow=g729 >>> >>> [phone] >>> disallow=all >>> allow=ulaw >>> allow=alaw >>> allow=g729 >>> >>> There's the codec configs for the gateway and the phone in question. >>> I even attempted to setup the phone with only the allow=g729, but in >>> that instance it won't even complete the call. We had to add g711 >>> support to the gateway in question for now to get it up and running, >>> but we want to get it back to using only g729. >>> >>> CLI> show modules like g729 >>> Module Description >>> Use Count >>> format_g729.so Raw G729 data >>> 0 >>> codec_g729a.so Annex A/B (floating point) G.729 Codec >>> ( 0 >>> 2 modules loaded >>> >>> I downloaded the pre-compiled g729 module from Digium. The sip.conf >>> references g729 and the codec module is loaded. Unless there's >>> anything else I need to do that I'm missing? >>> >>> Thanks, >>> Scott >>> > > _______________________________________________ > > Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
