I'm trying a simple Echo test and it's failing for g729... exten => 1267,1,Answer() exten => 1267,2,Echo()
Test #1 (failure) gateway33 codecs g729a, g729b [gateway33] type=friend host=gateway33 context=default-inbound disallow=all allow=g729 gateway33 INVITE = g729b Asterisk 200 OK = no media Asterisk sends (one way) g711u RTP Test #2 (failure) gateway33 codecs g729a [gateway33] type=friend host=gateway33 context=default-inbound disallow=all allow=g729 gateway33 INVITE = g729a Asterisk 200 OK = no media gateway33 ends the session gateway33 INVITE = g729a Asterisk 200 OK = no media gateway33 ends the session ... Test #3 (success) gateway33 codec g729a, g729b, g711u [gateway33] type=friend host=gateway33 context=default-inbound disallow=all allow=ulaw allow=g729 gateway33 INVITE = g729b, g711u Asterisk 200 OK = g711u Asterisk sends/receives g711u RTP Does any of this point to a specific problem? I even have a licensed g729 channel. CLI> show g729 0/0 encoders/decoders of 1 licensed channels are currently in use What information can I provide to help troubleshoot? This is making no sense. When I setup my desk phone to use G729 and make the test call directly (bypassing the gateway), the call completes fine and media is sent using G729 successfully. I'm not sure why it would work any differently from a Cisco gateway? The only difference that I'm aware of is that my phone (Polycom 430) seemed to ask for G729, while the gateway was either G729a or G729b specifically. In the instance of my phone, Asterisk came back with G729a in the 200 OK message. Thanks, Scott _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
