On 9/20/07, Jared Smith <[EMAIL PROTECTED]> wrote: > > I'd look at your wiring, as an HDLC error like that is usually an > indication of some type of a problem at the physical layer. >
I tried two other cables this morning with the same results... While I was swapping cables around I unloaded asterisk and the zaptel modules. One thing I noticed once everything was hooked up and restarted is that Machine2 shows a red alarm but Machine1 shows both spans as clear of alarms... Otherwise everything looks the same as yesterday. Have any of you connected two asterisk machines by t1 crossover using pri_net/pri_cpe signaling? I am completely stumped and would love to know that some had done this and what their configuration look like. Thanks again, -Brian
_______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
