Dear List; Thanks alot for the help.
But how can I let the second dial tone (after pressing the extension to select that FXO port) to be difference than normal dial tone? Regards Bilal Ghayad -------------------------- Correction, on FXO port not FXS, second, read his email first: "Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line." Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling <[EMAIL PROTECTED]> wrote: > > ignorepat continues dialtone after a leading digit has been dialed on > FXS ports. How does ignorepat help this guy? > > Al lists wrote: > > ignorpat is your friend > > > > On 9/30/07, Tzafrir Cohen <[EMAIL PROTECTED]> wrote: > >> On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: > >>> Dear List; > >>> > >>> How can I place a call via Zap/g1 (group) but need to > >>> determine the line (FXO port) > >>> that will go via it? > >> Simply don't use groups. Use channels directly. To dial via the > specific > >> Zaptel channel NN, use Zap/NN > >> > >> Am I missing anything? > >> > >> -- > >> Tzafrir Cohen > >> icq#16849755 jabber:[EMAIL PROTECTED] > >> +972-50-7952406 mailto:[EMAIL PROTECTED] > >> http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ____________________________________________________________________________________ Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545469 _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
