Hi I've had an asterisk setup for the past 15 months, based on the debian asterisk packaging. Until late August of this year, I had no problems once initial setup was complete- the system worked essentially flawlessly.
Since August I have been having exceedingly infuriating intermittent problems that are causing me occasional periods of nasty trouble: 1. No Dial Tone. Every Sunday night at just prior to midnight ( about the last second before monday), the Dial tone ceases on all zap handsets. Investigation shows that the zaptel layer is not transmitting sound to the handset- ztmonitor shows it being sent, but nothing is arriving at the handset. (You can also see sound being rx from the handset). This problem has occured spontaneously at other times but the midnight thing is just plain odd (nothing is happening on that box at the time). 2. I tried to upgrade from the asterisk packages in debian etch (1.2.13) to sid (1.4.11). This added new problems to the mix. Suddenly, no voice was being offered through asterisk at all to any zap channel. I tracked it down to my use of T/t in the Dial strings- this was somehow preventing native bridging from occuring. This can be verified because other call routings (e.g. IAX->zap; SIP->zap) have the same problem (and cannot be corrected by removing a t/T because there's no native bridge). Reverting to 1.2.13 seems to have fixed this problem. (Is this some kind of sound path regression? Debug logging has shown nothing). 3. Finally, with 1.4.11 especially, the system seems to have been quite unstable, with asterisk crashing (and ringing every phone in the house incessantly- which my wife was NOT happy about), especially when two simultaneous calls overlap in some way (this hasn't crashed 1.2.13 as badly, but asterisk seemed to need a reset afterwards). I suspected a dodgy channel bank ( I had a really old eBay special for $20 which had timing problems from day 1 ) so I upgraded a little ( the Zhone - more expensive and not super, but at least it has firmware and a console for mgmt ). This has had some effect, but nothing has changed about the fundamental problem (1 above). Other hardware: the T1 interface card is the R1T1 from rhino, there is a Wildcard TDM400P REV I, with a single FXO port for the incoming line from the POTS. The computer itself seems quite fine, no sign of interrupt errors or other problems with the hardware (I ran a memtest and a cpuburn neither of which showed any issues). zttest shows nothing unusual (99.87% iirc over about 10 minutes). I am happy to share anything that will help resolve the issue- my feeble C skills in attempting some printf in the ast_channel_bridge command to see what was being chucked about pretty much failed entirely because the timing went badly off... Trying to chuck ast_log calls in there didn't work very well either :( Thanks Christian _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
