Dear Armin, This solve my problem, when I set softdtmf and relaxdtmf to off, my asterisk machine starts to detect the incoming fax calls.
Thank for your help. VoipCrazy. 2007/10/15, Armin Schindler <[EMAIL PROTECTED]>: > > On Mon, 15 Oct 2007, voip crazy wrote: > > Dear Armin, > > > > Bellow I send you my /etc/asterisk/capi.conf file, I just set > > faxdetect=both, but the card isn`t detect an incoming fax call. > > > > I use capicommand(receivefax|...), and work well, but I need that > asterisk > > or the diva card detects an incoming fax call to send it to a specific > > context. > > > > There are any way to use capicommand to detects fax incoming fax. > > Don't set > softdtmf=on > relaxdtmf=on > because your DIVA card can do this with the onboard DSPs and fax detection > should work then too. > > Armin > > > Thanks in advance. > > > > VoipCrazy > > > > ------Capi.conf------- > > > > [general] > > nationalprefix=0 > > internationalprefix=00 > > rxgain=1.0 ;linear receive gain (1.0 = no change) > > txgain=1.0 ;linear transmit gain (1.0 = no change) > > language=de ;set default language > > ;ulaw=yes ;set this, if you live in u-law world instead of a-law > > > > ;jb..... ;with Asterisk 1.4 you can configure jitterbuffer, > > ;see Asterisk documentation for all jb* setting > available. > > ;mohinterpret=default ;Asterisk 1.4: default music on hold class when > placed > > on hold. > > > > > > ; interface sections ... > > > > [ISDN] ;this example interface gets name 'ISDN1' and may be any > > ;name not starting with 'g' or 'contr'. > > ;Use one interface section for each isdn port! > > ;ntmode=yes ;if isdn card operates in nt mode, set this to yes > > isdnmode=msn ;'MSN' (point-to-multipoint) or 'DID' (direct inward > dial) > > ;when using NT-mode, 'DID' should be set in any case > > incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = > any > > ;defaultcid=123 ;set a default caller id to that interface for > dial-out, > > ;this caller id will be used when dial option 'd' is > set. > > ;controller=0 ;ISDN4BSD default > > ;controller=7 ;ISDN4BSD USB default > > controller=1 ;capi controller number of this interface/port > > group=1 ;dialout group > > ;prefix=0 ;set a prefix to calling number on incoming calls > > softdtmf=on ;enable/disable software dtmf detection, recommended > for > > AVM cards > > relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf > > detection > > faxdetect=both ;enable faxdetection and redirection to EXTEN 'fax' > for > > incoming and/or > > ;outgoing calls. (default='off', possible values: > > 'incoming','outgoing','both') > > accountcode=Canal-RDSI ;PBX accountcode to use in CDRs > > ;amaflags=default;AMA flags for CDR ('default', 'omit', 'billing', or > > 'documentation') > > context=from-pstn ;context for incoming calls > > ;holdtype=hold ;when the PBX puts the call on hold, ISDN HOLD will be > > used. If > > ;set to 'local' (default value), no hold is done and the > > PBX may > > ;play MOH. > > holdtype=local > > ;immediate=yes ;DID: immediate start of pbx with extension 's' if no > > digits were > > ; received on incoming call (no destination number > yet) > > ;MSN: start pbx on CONNECT_IND and don't wait for > > SETUP/SENDING-COMPLETE. > > ; info like REDIRECTINGNUMBER may be lost, but this > is > > necessary for > > ; drivers/pbx/telco which does not send SETUP or > > SENDING-COMPLETE. > > ;echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression > > ;echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation (yes=g165) > > ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') > > ;echocancelold=yes;use facility selector 6 instead of correct 8 > (necessary > > for older eicon drivers) > > ;echotail=64 ;echo cancel tail setting (default=0 for maximum) > > ;echocancelnlp=1 ;activate non-linear-processing; this improves echo > cancel > > ratio, but might > > ;incorporate variable gain in the signal path. > > bridge=yes ;native bridging (CAPI line interconnect) if available > > ;callgroup=1 ;PBX call group > > ;pickupgroup=1 ;PBX pickup group (which call groups are we allowed to > > pickup) > > ;language=de ;set language for this device (overwrites default > language) > > ;disallow=all ;RTP codec selection (valid with Eicon DIVA Server > only) > > allow=all ;RTP codec selection (valid with Eicon DIVA Server only) > > devices=2 ;number of concurrent calls (b-channels) on this > controller > > ;(2 makes sense for single BRI, 30/23 for PRI/T1) > > ;jb..... ;with Asterisk 1.4 you can configure jitterbuffer, > > ;see Asterisk documentation for all jb* setting > available. > > ;mohinterpret=default ;Asterisk 1.4: default music on hold class when > placed > > on hold. > > ;qsig=on ;enable use of Q.SIG extensions. > > > > ----------------------EOF-------------------------- > > > > > > 2007/10/15, Armin Schindler <[EMAIL PROTECTED]>: > >> > >> On Mon, 15 Oct 2007, voip crazy wrote: > >>> Dear Armin, > >>> > >>> the problem is my Eicon Diva Card does not detect aany fax-tone. Then > >> the > >>> call is redirect as a voice call instead a fax call. > >>> > >>> How could I detect the fax.-tone with this kind of hardware? > >>> How could I enable receivefax? > >> > >> Are we talking about a DIVA Server BRI card? > >> If yes, then the card can detect fax tone and you just need > >> to enabled this in capi.conf. > >> Then capicommand(receivefax|...) will help you. > >> > >> Armin > >> > >>> 2007/10/15, Armin Schindler <[EMAIL PROTECTED]>: > >>>> > >>>> Hello VoipCrazy !? > >>>> > >>>> On Mon, 15 Oct 2007, voip crazy wrote: > >>>>> Hello all, > >>>>> > >>>>> I am trying to set up asterisk and hylafax to send and receibe fax. > >> The > >>>>> machine is connected to the PSTN is an Eicon Diva BRI (1 BRI port). > >>>>> My problem is that , when I send a Fax from the PSTN to this > >>>> machine, the > >>>>> asterisk or diva or hylafax, does not detect this call as a fax and > >>>> asterisk > >>>>> answer that call like a voice call. > >>>>> > >>>>> How sould I configure the software modem (iaxmodem) to use with the > >>>> Eicon > >>>>> Diva card? > >>>>> What sould I do to make the Eicon Diva detects an incoming fax? > >>>> > >>>> If asterisk shall not accept this call, then configure asterisk not > to > >> do > >>>> so. Either use another number, or check the transfercapability (if > the > >>>> sender did set this correct). > >>>> Why don't you receive the fax via asterisk? You can answer the call > and > >> if > >>>> a fax-tone is detected, you switch to receivefax. > >>>> > >>>> Armin > >>>> > >>>> > >>>> _______________________________________________ > >>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- > >>>> > >>>> asterisk-users mailing list > >>>> To UNSUBSCRIBE or update options visit: > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>> > >>> > >> > >> _______________________________________________ > >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users