Asterisk 1.4.2 I have spent much of today trying to make a DID (from SIP GW) ring to 4 extensions in a hunt (roll-over) group. Results from searching docs and forums seem to indicate it is doable and so trivial no one includes an actual example.
I can make all 4 exts ring at once with the like of exten => _1655,1,Ringing() exten => _1655,2,Dial(SIP/1655&SIP/1656&SIP/1657&SIP/1658) exten => _1655,3,Hangup() exten => _1655,103,Congestion() but I want to ring the 1st ext, if it is busy then ring the 2nd, etc... I am trying to emulate a 10-line 20 phone key system. The end user does not like all the phones ringing at once. I have tried lots of combinations in extensions.conf including the following that I would think should work... the 2nd line never rings, just dead air, or I hear a click and dead air... where am I going wrong !! This did not work, not sure why exten => _1655,1,Ringing() exten => _1655,2,Dial(SIP/1655) exten => _1655,103,Dial(SIP/1656) exten => _1655,104,Hangup() exten => _1655,204,Dial(SIP/1657) exten => _1655,205,Hangup() exten => _1655,305,Dial(SIP/1658) exten => _1655,306,Hangup() exten => _1655,406,Congestion() !! this didn't work , I hear no ringing, 2nd call gave some wierd error about codec and slin exten => _1655,1,Answer() exten => _1655,2,Dial(SIP/1655,30) exten => _1655,3,Hangup() exten => _1655,103,Dial(SIP/1656,20) exten => _1655,104,Hangup() exten => _1655,204,Dial(SIP/1657,10) exten => _1655,205,Hangup() exten => _1655,305,Dial(SIP/1658) exten => _1655,306,Hangup() exten => _1655,406,Congestion() Any clues will be greatly appreciated! Thanks, Rich _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
