Greetings to all list members! My name is Aldo Sudak and I am an Asterisk newbie. I am writing now because I have not been able to find any mention to the issues described below, neither in this list nor in the wiki.
I am performing preliminary tests with Asterisk 1.4.11 and Zaptel 1.4.5.1 on Fedora Core 6. Installation of all of the Asterisk packages was straightforward and I always obtained success messages. Following Asterisk and Zaptel installation I ran the corresponding make config commands in order to have both Asterisk and Zaptel running at startup. With Zaptel, however, two issues arose: 1) zaptel.conf in the /etc/ directory had not been created. The GUI loaded itself a very rudimentary zaptel.conf file which lacked loadzone and defaultzone definitions, so I prefered to manually copy and paste zaptel.conf.sample from the sources and rename it. 2) Zaptel modules loaded during bootup but were not automatically configured, and so I had to manually run ztcfg and afterwards restart Asterisk each time I started the computer. I discovered that there did not exist a 'zaptel' file in the /etc/modprobe.c/ directory, so I made an experiment by installing Zaptel 1.4.4, which generated the file, and then re-installing Zaptel 1.4.5.1. The experience was successful and now Zaptel 1.4.5.1 is loaded and configured during bootup. Anyhow , I think all these manipulations should not be necessary, and I would like to know if I did something wrong in order for all this to be happening. Suggestions are welcome. Thanks in advance. Aldo
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
