Of course, use the codec for the pentium 4!! bilal ghayyad a écrit : > Dear Marc; > > Thanks a lot for your kindly help. > > My output of the command cat /proc/cpuinfo is: > > [EMAIL PROTECTED] /]# cat /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 15 > model : 4 > model name : Intel(R) Pentium(R) 4 CPU 3.40GHz > stepping : 1 > cpu MHz : 3391.901 > cache size : 1024 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 > apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx > fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni > monitor ds_cpl cid cx16 xtpr > bogomips : 6787.39 > clflush size : 64 > > > So what means I have to download > codec_g729a_v32_pentium4m.tar.gz ? > > But the output of the command (from Asterisk CLI): > > CLI> core show version is: > > Asterisk SVN-branch-1.4-r72556 built by root @ > localhost.localdomain on a i686 running Linux on > 2007-06-30 13:08:08 UTC > > I tried this codec: codec_g729a_v32_i686.tar.gz but > when I type show modules like 72 then it gives me the > following (that doesnot contain g729.a): > > localhost*CLI> show modules like 72 > Module Description > Use Count > format_g729.so Raw G729 data > 0 > format_g723.so G.723.1 Simple > Timestamp File Format 0 > codec_g726.so ITU G.726-32kbps G726 > Transcoder 0 > format_g726.so Raw G.726 > (16/24/32/40kbps) data 0 > 4 modules loaded > > So can u advise? > > Regards > Bilal > > > > > > > > --- Marc LEURENT <[EMAIL PROTECTED]> wrote: > > To know your architecture, use the cmd: cat > /proc/cpuinfo > > After try to start to use the version below (i686): > >> http://downloads.digium.com/pub/telephony/codec_g729/asterisk-1.4/x86-32/codec_g729a_v32_i686.tar.gz > Good luck > > > bilal ghayyad a écrit : >>>> Dear Marc; >>>> >>>> I readed your email about the codec G729a and I am > now >>>> also need to install the codec on my Asterisk. >>>> >>>> I typed from Asterisk CLI: >>>> >>>> core show version and I got the following: >>>> >>>> Asterisk SVN-branch-1.4-r72556 built by root @ >>>> localhost.localdomain on a i686 running Linux on >>>> 2007-06-30 13:08:08 UTC >>>> >>>> So I beleive that my processor is i686, correct? > But I >>>> am not able to know which one to download: >>>> >>>> The x86-32 or x86-64 ? Can you please advise. >>>> >>>> Also, the nocona or the opteron versions? >>>> >>>> Regards >>>> Bilal >>>> >>>> ------------------- >>>> Good Morning, >>>> Any help would be grateful to help me > understanding >>>> what's wrong... >>>> >>>> I have bought 2 g729a licenses to digium and I > would >>>> like to have them >>>> works... >>>> My processor is an Intel(R) Xeon(R) CPU >>>> E5310 @ 1.60GHz (4 >>>> processors) >>>> so I have downloaded the >>>> >>>> >> http://downloads.digium.com/pub/telephony/codec_g729/asterisk-1.4/x86-64/codec_g729a_v32_nocona.tar.gz >>>> codec >>>> I have registered my license, copied the >>>> codec_g729a.so into the >>>> /usr/lib/asterisk/modules folder and restarted my >>>> asterisk >>>> >>>> But on the CLI when I type >>>> asterisk*CLI> show modules like 72 >>>> Module Description > >>>> >>>> Use Count >>>> codec_g726.so ITU G.726-32kbps > G726 >>>> Transcoder >>>> 0 >>>> format_g729.so Raw G729 data > >>>> >>>> 0 >>>> format_g726.so Raw G.726 >>>> (16/24/32/40kbps) data >>>> 0 >>>> format_g723.so G.723.1 Simple >>>> Timestamp File Format >>>> 0 >>>> >>>> The codec_g729a.so doesn't appear.......... >>>> >>>> >>>> Any idea how to solve the problem..... >>>> >>>> Thanks >>>> >>>> Best Regards, >>>> >>>> Marc LEURENT >>>> >>>> >>>> __________________________________________________ >>>> Do You Yahoo!? >>>> Tired of spam? Yahoo! Mail has the best spam > protection around >>>> http://mail.yahoo.com >>
> __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
