Yep - as Doug mentioned, give esf framing and national switchtype a try. I have a PRI from AT&T in one of my offices, and use this setup.
-erik On 11/1/07, Lutgring, Sam <[EMAIL PROTECTED]> wrote: > > > > I am in the process of implementing a new ISDN pri and have a couple of > questions. This is a full 24 channels (23 B and 1 D) delivered over a T1 > interface. The interface looks good and is not showing any errors. Any > help that you can provide would be greatly appreciated. > > 1) What switchtype should be configured in the zapata.conf file when AT&T > is using CUSTOM? My understanding is that this equates to the dms100 in > Asterisk, is this right? The D channel is coming up just fine, but AT&T > tells me that they cannot see the B channels. When I try to make a call I > get a slow busy and the debug shows an ISDN cause code of 34, no circuit > available. > > 2) Is there a way to see the idle status of a B channel? When AT&T tells > me they don't see the B channels coming up, is there a way that I can see > this in Asterisk??? > > Thanks in advance. > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Erik Anderson http://andersonfam.org _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
