[EMAIL PROTECTED] wrote: > Hi. > > > > I have installed B410P in Europe and the cards works more or less ok. My > question is what color should the LED's on the back of the card be when > connected to the PSTN NT box? Is there anywhere some information on the > expected LED color in any given state (idle, call active, cord unplugged > etc.)? > > > > On my card the lights are shining Red(orange-ish) but flashing to green > every now and then and then shining green when there is a call on one of the > lines for that port.
That is correct. On zaptel-1.4/misdn-1.1.x you should see a blinking red when layer 2 is not up, constant red when layer 2 is up, and it will flash green when D-channel messages are sent on the port. -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users