Hi Luki, Thanks for your advice. I've checked the firewall and it is set to allow all incoming traffic. I changed the media port range as well with no success.
Some calls work fine. This is the configuration that doesn't work. The RTP traffic passes along the chain fine, but the Asterisk server doesn't do anything with the packets it gets from the near-end SIP phone and the media gateway. SIP Phone <-> Media Gateway <-> Asterisk <-> SIP Phone An asterisk internal call will work fine. Eg; SIP Phone <-> Asterisk <-> SIP Phone Regards Ryan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Luki Sent: Sunday, 11 November 2007 12:52 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] RTP traffic not being forwarded > When using 'rtp debug' on the asterisk console, it shows that it is > receiving traffic from one endpoint, but not the other. A wireshark trace > reveals it is actually receiving traffic from both ends. Sounds like a firewall issue. Wireshark shows what's "on the wire", i.e. before iptables. The packets are being dropped for whatever reason and never reach the asterisk process. Check your iptables and RTP port range, and perhaps try changing it. Luki _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
