On Monday 12 November 2007 07:54:42 Dave Fullerton wrote: > From what I've heard, I think your best bet is to buy a multi-port > T1/E1 card for asterisk, put your E1 in one port and a channel bank in > the other port, then plug your fax extension into an FXS port on the > channel bank. Since both legs of the call pass through the same E1 > interface card asterisk can bridge the call on the card itself and the > timing issue should become moot. I have not done this nor have any > hands-on experience to share, but I have done some research into this in > the past. This is also the method Fonality recommends for customers of > their asterisk based system:
That is exactly what I do in my systems. I did have success with a TDM400<-->T100P but that was a long time ago and I was unable to repeat it recently. I didn't spend a whole lot of time on it, though. -A. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
