Hello, I currently have a pretty standard 1.2.21 Asterisk system running purely SIP termination (no zap/IAX/H323..etc).
We have an auto-dialing system that generates calls via the manager API. The system runs beautifully until it gets to about 200 calls. I can generate these calls in quite literally seconds if desired (or minutes). The kicker: I can't seem to get past this 200 call point even though the system is/seems very idle. Low CPU utilisation (~40%), plenty of RAM, close to zero disk usage (I/O Wait ~2%), bandwidth is plentiful (1Gbit) and the current calls are crystal clear. I get the feeling Asterisk is ignoring or dumping manager events. We watch for the "Success" from the originate command and it comes if there is less than roughly 200 calls but is unreliable after that. I could understand if this was happening at 100% cpu but not at the under-utilised state the box is at. Any hints? Thanks, Nick. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
