which panasonic system is this? as I have succesfully integrated panasonic systems in the past without a problem
On 11/14/07, jorain <[EMAIL PROTECTED]> wrote: > Hi all, > > I have an existing panasonic analog pbx in use and a asterisk server with > digium tdm400p(2 fxs and 2 fxo). > > channel 1 -> fxs -> telephone > channel 2 -> fxs -> telephone > channel 3 -> fxo -> extension 15 at panasonic pbx > channel 4 -> fxo -> phone line from telco > > We call in to fxo (channel 4) and enter the ivr which prompt us to enter the > extension number. After that asterisk will dialout from fxo(channel 3) to > other extensions at panasonic pbx(eg ext 16,17,18 etc) > > The problem is when the extension 16 at panasonic pbx answers the call, > asterisk can only detect the ANSWER after few seconds(range from 2 to 20 > seconds). > > If the extension 16 is busy, caller gets a busy tone (approximately 10 > seconds) before asterisk detects the BUSY status and run the following > commands in dialplan. > > I have tried > - to call from telephone at fxs(channel 1) to pstn number using channel 4, > it can detect the status immediately. > - testing the outcome of settings in zapata.conf(busydetect, busycount, > answeronpolarity, hanguponpolarity) > > > Another question, is there any asterisk utility which can detect the tone on > a channel so that we can get its pattern? > > > > Regards, > jorain _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
