On Wed, 2003-12-10 at 20:19, Dorian Gray wrote:
working fine here as well. was not able to install manually since the sipura site had only a windows .exe last time I checked; however, it got upgraded to 1.0.18 when I signed up for the free month of voicepulse service and they provisioned it through tftp.
Just curious. How do Voicepulse works with any xDSL providers ? AFAIK SPA-2000 doesÂnt have a PPPoE client. Are the modem making PPPoE ? In that case you need to make some PAT on the modem in order to forward SIP and RTP. Any comments ?
I don't know, I have cable rather than dsl. but attaching an iptables nat/firewall or using one of those little consumer nat devices, should allow it to work with pppoe.
since voicepulse (for obvious reasons) do not want to allow direct asterisk access to their monthly plans, I'm currently using x100p to dial out through the sipura device. a little inelegant (in addition to the extra d/a-a/d conversion, prerouting/dnat has to dump certain netblocks directly to the spa2000, to allow *'s own sip server to continue to work) but no problems in use or function so far.
also, currently only ulaw is supported on their consumer side (so I will most likely go back to using vp-connect! once this free month is over) -- some cable (or especially dsl connections) may actually not have enough uplink to run that codec; and even with a traffic-shaper doing its merry little magic, my uplink still gets hosed sometimes when using the phone while doing some other net-intensive stuffs.
I imagine vp are working to support gsm and/or ilbc in their monthly plans, but I've not yet heard back from customer service on this issue.
cheers ++dg
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
