Great thanks steve and bj. As long as its normal I guess I can deal with leaving it at the default. I was just concerned it could be an error with the line, when I first hooked up the t1 I noticed the line going up/down/up/down for 4 or 5 cycles before finally working.
Is there a reason it resets? Aka does it serve any kind of purpose? Thanks! Mike -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro Sent: Friday, November 23, 2007 9:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Annoying PRI Channels Restarting Message Wrong. Set resetinteral if it is too annoying but it is normal behavior although I remember it causing issues with some people in Italy if memory serves me correctly. From the wiki *resetinterval*: sets the time in seconds between restart of unused channels, defaults to 3600 minimum 60 seconds. Some PBXs don't like channel restarts. so set the interval to a very long interval e.g. 100000000 or 'never' to disable *entirely*. *If you are in Israel, the following is important:* As Bezeq in Israel doesn't like the B-Channel resets happening on the lines, it is best to set the resetinterval to 'never' when installing a box in Israel. Our past experience also shows that this parameter may also cause issues on local switches in the UK and China. *For more information:* tech at asterisk.org.il Thanks, Steve Alex Balashov wrote: > My guess is that the B channels are in fact bouncing in and out of > service and the message is a reflection of it. > > On Fri, 23 Nov 2007, Michael J. Liberatore wrote: > > >> Hi all, i have recently setup a p2p t1 using sangoma t1 cards and >> asterisk 1.4. Its working great but i am getting an annoying message >> every little while in asterisk: >> >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/16 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/17 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/18 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/19 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/20 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/21 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/22 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/23 >> restarted on span 2 >> >> >> Basically this goes through all 23 channels and then says its was >> successfully restarted. >> >> the link doesnt appear to be going down because there is nothing in >> the system log that normally comes up when the link actually goes up >> or down. this appears to be some asterisk thing. its not affecting >> calls as far as i can tell and doesnt seem to happen when the >> channels are in use. >> >> Any ideas? Can this be ignored? If so, can i safely disable this by >> changing it to a debug message in the code? Thats what i did with an >> annoying message caused by setting ext 700 as a orbit on a snom phone. >> >> Thanks >> >> Mike >> >> >> >> >> This E-mail, including any attachments, may be intended solely for >> the personal and confidential use of the sender and recipient(s) >> named above. This message may include advisory, consultative and/or >> deliberative material and, as such, would be privileged and >> confidential and not a public document. Pursuant to 42 CFR, any >> information in this e-mail identifying a former, present, or potential client of Straight & Narrow is confidential. If you have received this e-mail in error, you must not review, transmit, convert to hard copy, copy, use or disseminate this e-mail or any attachments to it and you must delete this message. You are requested to notify the sender by return e-mail. >> >> >> > > -- > Alex Balashov > Evariste Systems > Web : http://www.evaristesys.com/ > Tel : +1-678-954-0670 > Direct : +1-678-954-0671 > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
