We have the following weird issue. When we call an unallocated number from asterisk through an E1/PRI euroisdn, the call disconnect with cause 31 (unspecified), This produce an Asterisk congestion message. If the same E1/PRI trunk is now connected to a Nortel BCM400, the call disconnect with cause 1 (unallocated number) which is correct, and the telco play the message "the dialled number does not exist". All other calls work fine so far. Testing with "priindication = outofband" and "priindication = inband" give the same results.
Any pointer please? Jorge Mendoza Our information: - OS Centos 5, 64 bits - Asterisk 1.4.13 - Zaptel 1.4.6 - libpri 1.4.1 - Wanpipe-3.2.1 (Sangoma A104DX) Attached are: - zapata.conf - zaptel.conf - debug_invalid_20071204 (a call to a unallocated number)
T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (36) > [ 00 01 01 49 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 036 P/F: 1 > 0 bytes of data -- Restarting T203 counter < [ 00 01 01 45 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 034 P/F: 1 < 0 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (36) > [ 00 01 01 49 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 036 P/F: 1 > 0 bytes of data -- Restarting T203 counter < [ 00 01 01 45 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 034 P/F: 1 < 0 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (36) > [ 00 01 01 49 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 036 P/F: 1 > 0 bytes of data -- Restarting T203 counter < [ 00 01 01 45 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 034 P/F: 1 < 0 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (36) > [ 00 01 01 49 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 036 P/F: 1 > 0 bytes of data -- Restarting T203 counter < [ 00 01 01 45 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 034 P/F: 1 < 0 bytes of data -- ACKing all packets from 33 to (but not including) 34 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter -- Making new call for cr 32772 > [ 00 01 44 48 08 02 00 04 05 04 03 80 90 a3 18 03 a9 83 81 6c 06 21 80 31 30 > 33 34 70 08 a1 34 32 38 37 30 35 36 a1 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 034 0: 0 > N(R): 036 P: 0 > 34 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=34 > Call Ref: len= 2 (reference 4/0x4) (Originator) > Message type: SETUP (5) > [04 03 80 90 a3] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: > Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode > (16) > Ext: 1 User information layer 1: A-Law (35) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive > Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 ] > [6c 06 21 80 31 30 33 34] > Calling Number (len= 8) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number > not screened (0) '1034' ] > [70 08 a1 34 32 38 37 30 35 36] > Called Number (len=10) [ Ext: 1 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4287056' ] > [a1] > Sending Complete (len= 1) q931.c:2879 q931_setup: call 32772 on channel 1 enters state 1 (Call Initiated) < [ 00 01 01 46 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 035 P/F: 0 < 0 bytes of data -- ACKing all packets from 33 to (but not including) 35 -- ACKing packet 34, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter < [ 02 01 48 46 08 02 80 04 02 18 03 a9 83 81 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 036 0: 0 < N(R): 035 P: 0 < 10 bytes of data -- ACKing all packets from 34 to (but not including) 35 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= 2 (reference 4/0x4) (Terminator) < Message type: CALL PROCEEDING (2) < [18 03 a9 83 81] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 ] -- Processing IE 24 (cs0, Channel Identification) q931.c:3426 q931_receive: call 32772 on channel 1 enters state 3 (Outgoing call Proceeding) Sending Receiver Ready (37) > [ 02 01 01 4a ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 037 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter < [ 02 01 4a 46 08 02 80 04 45 08 02 84 9f 1e 02 82 88 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 037 0: 0 < N(R): 035 P: 0 < 13 bytes of data -- ACKing all packets from 34 to (but not including) 35 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 4/0x4) (Terminator) < Message type: DISCONNECT (69) < [08 02 84 9f] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the remote user (4) < Ext: 1 Cause: Normal, unspecified (31), class = Normal Event (1) ] < [1e 02 82 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] -- Processing IE 8 (cs0, Cause) -- Processing IE 30 (cs0, Progress Indicator) q931.c:3561 q931_receive: call 32772 on channel 1 enters state 12 (Disconnect Indication) Sending Receiver Ready (38) > [ 02 01 01 4c ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 038 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request q931.c:2715 q931_release: call 32772 on channel 1 enters state 19 (Release Request) > [ 00 01 46 4c 08 02 00 04 4d 08 02 81 9f ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 035 0: 0 > N(R): 038 P: 0 > 9 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 4/0x4) (Originator) > Message type: RELEASE (77) > [08 02 81 9f] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > Location: Private network serving the local user (1) > Ext: 1 Cause: Normal, unspecified (31), class = Normal > Event (1) ] < [ 00 01 01 48 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 036 P/F: 0 < 0 bytes of data -- ACKing all packets from 34 to (but not including) 36 -- ACKing packet 35, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 counter < [ 02 01 4c 48 08 02 80 04 5a ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 038 0: 0 < N(R): 036 P: 0 < 5 bytes of data -- ACKing all packets from 35 to (but not including) 36 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 4/0x4) (Terminator) < Message type: RELEASE COMPLETE (90) q931.c:3501 q931_receive: call 32772 on channel 1 enters state 0 (Null) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null Sending Receiver Ready (39) > [ 02 01 01 4e ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 039 P/F: 0 > 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (39) > [ 00 01 01 4f ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 039 P/F: 1 > 0 bytes of data -- Restarting T203 counter < [ 00 01 01 49 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 036 P/F: 1 < 0 bytes of data -- ACKing all packets from 35 to (but not including) 36 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (39) > [ 00 01 01 4f ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 039 P/F: 1 > 0 bytes of data -- Restarting T203 counter < [ 00 01 01 49 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 036 P/F: 1 < 0 bytes of data -- ACKing all packets from 35 to (but not including) 36 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter
;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig [trunkgroups] [channels] language=es context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A104 port 1 [slot:4 bus:29 span: 1] switchtype=euroisdn ;context=from-pstn context=from-zaptel group=0 signalling=pri_cpe ;signalling=pri_net channel => 1-15,17-31 ;Sangoma A104 port 2 [slot:4 bus:29 span: 2] switchtype=euroisdn ;context=from-pstn context=from-zaptel group=0 signalling=pri_cpe ;signalling=pri_net channel => 32-46,48-62 ;;Sangoma A104 port 3 [slot:4 bus:29 span: 3] ;switchtype=euroisdn ;;context=from-pstn ;context=from-zaptel ;group=0 ;signalling=pri_cpe ;;signalling=pri_net ;channel => 63-77,79-93 ;;Sangoma A104 port 4 [slot:4 bus:29 span: 4] ;switchtype=euroisdn ;;context=from-pstn ;context=from-zaptel ;group=0 ;;signalling=pri_cpe ;signalling=pri_net ;channel => 94-108,110-124
# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A104 port 1 [slot:4 bus:29 span: 1] span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 #Sangoma A104 port 2 [slot:4 bus:29 span: 2] span=2,2,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 #Sangoma A104 port 3 [slot:4 bus:29 span: 3] #span=3,2,0,ccs,hdb3,crc4 #bchan=63-77,79-93 #dchan=78 #Sangoma A104 port 4 [slot:4 bus:29 span: 4] #span=4,0,0,ccs,hdb3,crc4 #bchan=94-108,110-124 #dchan=109
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
