Am Freitag, den 07.12.2007, 17:53 -0300 schrieb [EMAIL PROTECTED]: > Hi all, > > I don't know if this is the right list to ask, since > I'm using Trixbox version 1.0.0.28, that has asterisk > 1.2.17. > I'm trying to configure the ring timeout value for my > local extensions (when dialing from one to another), > and the dial command simply ignores my values... I > have one extension 0017 in my box, so I used the > command Dial(SIP/0017|100|rTtWw) to dial to it. The > call gets completed without a problem, but it only > rings for 30 seconds, when it should ring for a 100 > seconds. I'm pretty sure this is my mistake here, but > I didn't find a solution. I also tried changing the > value directly in trixbox web interface that says > "Number of seconds to ring phones before sending > callers to voicemail" and nothing happens. I know that > trixbox does weird things to my configuration files, > but I edited extenions.conf, since it does not get > messed up by trixbox.
It might be related to the phones you use; some models seem to have an internal timeout, after which the call will be rejected - this forces the Dial() to terminate. You might try to find information about that: It might be configurable in the phone. I am not well informed about trixbox, but I assume you can get an asterisk console by "asterisk -r". Use that and "verbose 10" to retrieve the events that occur when the timeout falls. That might help you find the culprit. Regards Anselm _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
