Hi, This is our test setup: 4 phones, 2 logged into the one queue, the other 2 phones are used to dial into the queue.
If there are 2 calls coming into the queue at the same time, we would like to have the 2 queue phones ringing at the same time (one for each call). But as it is, the 2nd phone only starts ringing after the first one was picked up. Scenario: One of the non-queue phones dials the queue number, one of the queue phones rings. Now (while this phone is still ringing) the second non-queue phone dials the queue also, but nothing happens. The person on this phone gets a ring-tone, but still only the first queue-phone actually rings (because of the first call), the second queue-phone is silent (it should be ringing, though, because of the 2nd call). So there's 2 people phoning the queue (both hearing ring tones), 2 phones in the queue ready to answer incoming calls, but only the first phone is ringing. If, however, the first queue-phone is picked up, then finally the second queue-phone starts ringing. Why aren't those two queue phones ringing simultaneously if there's more than one incoming call? Is there a way to change the Asterisk/queue configuration so simultaneous calls cause simultaneous rings (note: that's not the same as 'ringall'). Thanks, Markus _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
