I upgraded to Linux kernel 2.6.23-gentoo-r3 and bluez-libs-3.23. I'm still having the same problem.
What should I do now? Rob Rob wrote: > Additional info: > hci0: Type: USB > BD Address: 00:18:E7:22:XX:XX ACL MTU: 1017:8 SCO MTU: 64:8 > UP RUNNING PSCAN ISCAN > RX bytes:21770594 acl:2032 sco:423505 events:13465 errors:0 > TX bytes:16184599 acl:1078 sco:315044 commands:6278 errors:0 > Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH HOLD SNIFF PARK > Link mode: SLAVE ACCEPT > Name: 'BlueZ (0)' > Class: 0x3e0100 > Service Classes: Networking, Rendering, Capturing, Object > Transfer, Audio > Device Class: Computer, Uncategorized > HCI Ver: 2.0 (0x3) HCI Rev: 0x4020 LMP Ver: 2.0 (0x3) LMP > Subver: 0x430e > Manufacturer: Broadcom Corporation (15) > > bluez-libs-2.25 > Linux kernel 2.6.22-gentoo-r9 > > > I see from issue 10719 (http://bugs.digium.com/view.php?id=10719) that a > later version of bluez-libs is recommended. I'll try that. (Please add > this recommendation to chan_mobile.txt and whatever other appropriate > documentation...) > > Rob > > > Rob wrote: > >> I built [EMAIL PROTECTED] and [EMAIL PROTECTED] I have my >> Bluetooth cell phone connected. It almost works. >> >> >> In mobile.conf, I have "context=incoming-mobile" for the phone, and that >> looks like: >> context incoming-mobile { >> _. => { >> VoiceMail(9999,b); >> Hangup(); >> }; >> } >> >> Calls to the cell phone get directed answered by Asterisk and directed >> to voicemail immediately, as expected. The outgoing message is heard >> ("The person ... is busy. Please leave a message <beep>"), then is >> disconnected immediately after the beep. I see the following in the logs: >> >> channel.c:2992 in set_format: Set channel Mobile/SCP2500-7fc8 to write >> format slin >> rtp.c:1089 in ast_rtcp_read: Got RTCP report of 104 bytes >> app.c:657 in __ast_play_and_record: One waitfor failed, trying another >> app.c:661 in __ast_play_and_record: No audio available on >> Mobile/SCP2500-7fc8?? >> >> Calling via any other method to leave voicemail works correctly. >> >> >> Also, when making outgoing calls (eg softphone -> asterisk -> >> bluetoothphone -> pstn), audio from the softphone is heard on the pstn >> phone nearly immediately, but audio from the pstn phone is delayed by >> approximately 1 second before being heard by the softphone. When using >> the cell phone to call the pstn directly (no asterisk), audio is heard >> nearly immediately both ways. The 1 second delay causes the >> asterisk+bluetoothphone setup to be nearly unusable. >> >> >> What causes these problems? What can I do to diagnose them? Is >> something configured incorrectly? >> >> Rob >> >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
