What comes up in the Asterisk CLI ? Set debug and verbosity to 9 and see what comes up. Also it can be a NAT issue ? Have Asterisk register every 3-4 minutes.
On Dec 24, 2007 4:00 PM, Jaap Winius <[EMAIL PROTECTED]> wrote: > Hi all, > > Perhaps someone here could help me with this. I'm new to Asterisk, but > have already met with some success at getting my first system to work > with two different VoIP (SIP) providers: XS4ALL and InternetCalls.com. > The config > for the former works fine, but my InternetCalls.com config works only > intermittently for incoming calls. It currently looks like this: > > [general] > port=5060 > bindaddr=0.0.0.0 > srvlookup=yes > register => <usr-name>:<passwd>@sip.internetcalls.com/inetcalls-in > > [inetcalls] > type=friend > context=inetcalls-in > nat=yes > username=<usr-name> > fromuser=<usr-name> > secret=<passwd> > host=sip.internetcalls.com > canreinvite=no > qualify=yes > dtmfmode=inband > insecure=invite > disallow=all > allow=ulaw > allow=alaw > > When I dial in from outside and it doesn't work, all I get is a busy > signal and no further clues as to what might be wrong. Any ideas? > > Thanks very much, > > Jaap > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
