On Wed, Dec 26, 2007 at 06:13:39PM +0200, Dominik Zalewski wrote:
> Dear All,
>
> I'm using Asterisk 1.4.16.2 with Zaptel 1.4.7 on Debian with kernel
> 2.6.18.
>
> I have two analog lines Zap/1 and Zap/2 as group 1 in zapata.conf. I'm
> using below context for dialing out.
>
> [outbound-local]
> exten => _9XXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _9XXXXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _9ZXXXXXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _9ZXXXXXXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _90900XXXXX,1,Dial(Zap/g1/${EXTEN:1},30m,tTr)
>
> When Zap/1 is busy and I try to call, it will use Zap/2 which is fine
> but there is something wrong cause I hear one ring and then a weird
> sound like a noise or something and then hangup. I have to reload zaptel
> modules and then everything works fine for a while.
>
> -- Executing [EMAIL PROTECTED]:1] Dial("SIP/200-08221590",
> "Zap/g1/150|30|tTr") in new stack
> -- Called g1/150
> -- Zap/2-1 answered SIP/200-08221590
> -- Hungup 'Zap/2-1'
>
> I even thought that second fxo module is broken so I changed it. No
> results.
Can you take SIP out of the picture?
Try the following in the command-line:
originate Zap/2/150 application Echo
Next, get some debug logging: enable "debug" or "full" in logger.conf
logger reload
core set verbose 3
core set debug 5
Make a call, and post the relevant parts of the log. This should give
some more clues about who caused the hangup and why.
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
