On Thu, Dec 27, 2007 at 04:00:49PM +0100, Jaap Winius wrote:
> Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
>
> >> > cat /proc/zaptel/*
> >>
> >> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED
> >> (F4)" AMI/CCS
> >>
> >> 1 ZTHFC1/0/1 Clear (In use)
> >> 2 ZTHFC1/0/2 Clear (In use)
> >> 3 ZTHFC1/0/3 HDLCFCS (In use)
> >> Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [TE] layer 1 ACTIVATED (F7)"
> >> AMI/CCS
> >>
> >> 4 ZTHFC2/0/1 Clear (In use)
> >> 5 ZTHFC2/0/2 Clear (In use)
> >> 6 ZTHFC2/0/3 HDLCFCS (In use)
> >
> > Looks like it's already configured and used by Asterisk.
>
> Indeed. It would appear that Asterisk now recognizes these cards. Of
> course, I now have another set of problems, but I'll ask about those
> in a new thread.
>
> > However, I believe that the ports are disconnected, right?
>
> Physically? One had a cable in it, the other one didn't.
Sorry, and it is clearly stated above. I have just misread it.
So basically dial to Zap/g0/NUMBER and it should dial it to and it should
dial it to your provider.
Using pridialplan=unknown in zapata.conf may also help.
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
