Hi list, Just thought I'd let you know that the problems outlined in my previous post apparently had to do with a bad card. After swapping it out for another one the messages went away.
Of course, I still have some problems. For instance, there's this error that keeps appearing in my syslog and kern.log: zaphfc: empty HDLC frame or bad CRC received Any idea how to get rid of it? Thanks, Jaap ============================================== Quoting Jaap Winius <[EMAIL PROTECTED]>: > Hi list, > > Now that I've got my Asterisk server to recognize my HFC-PCI card, I've run > into some serious problems. The first thing I noticed was this message > that would show up every five seconds on the CLI: > > Dec 27 15:46:42 WARNING[12484]: chan_zap.c:2512 pri_find_dchan: No > D-channels available! Using Primary channel 3 as D-channel anyway! > == Primary D-Channel on span 1 down > > Second, the syslog and the kern.log were quickly filling up with messages > like these: > > Dec 27 16:52:53 bitis kernel: zaphfc: sync lost, cpu throtteling enabled. > Dec 27 16:52:53 bitis kernel: zaphfc: sync lost, pci performance too > low. you might have some cpu throtteling enabled. > Dec 27 16:52:53 bitis last message repeated 31 times > Dec 27 16:52:53 bitis kernel: zaphfc: bchan rx fifo not enough bytes > to receive! (z1=4069, z2=4062, wanted 8 got 7), probably a buffer > overrun. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users