Quoting Tzafrir Cohen <[EMAIL PROTECTED]>: > What do you mean by "busy"? What exactly do you see?
This kind of thing: # cat /proc/zaptel/* Span 1: ZTHFC1 "HFC-S PCI A Zaptel Driver card 0 [TE]" (MASTER) AMI/CCS 1 ZTHFC1/0/1 Clear (In use) 2 ZTHFC1/0/2 Clear (In use) 3 ZTHFC1/0/3 HDLCFCS (In use) Span 2: ZTHFC1 "HFC-S PCI A ISDN card 1 [TE]" AMI/CCS 4 ZTHFC1/0/1 Clear (In use) 5 ZTHFC1/0/2 Clear (In use) 6 ZTHFC1/0/3 HDLCFCS (In use) Any attempts to call out result in the following CLI output: [Dec 30 16:15:41] WARNING[12918]: app_dial.c:1130 dial_exec_full: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time (1:0/1/0) == Auto fallthrough, channel 'SIP/1000-081ff9f8' status is 'CONGESTION' [Dec 30 16:15:41] NOTICE[12918]: cdr.c:434 ast_cdr_free: CDR on channel 'SIP/1000-081ff9f8' not posted CLI> zap restart: Destroying channels and reloading zaptel configuration. == Parsing '/etc/asterisk/zapata.conf': Found == Parsing '/etc/asterisk/zapata-channels.conf': Found [Dec 30 16:32:41] WARNING[13612]: chan_zap.c:1081 zt_open: Unable to specify channel 1: Device or resource busy [Dec 30 16:32:41] ERROR[13612]: chan_zap.c:7501 mkintf: Unable to open channel 1: Device or resource busy here = 0, tmp->channel = 1, channel = 1 [Dec 30 16:32:41] ERROR[13612]: chan_zap.c:12266 build_channels: Unable to register channel '1-2' [Dec 30 16:32:41] WARNING[13612]: chan_zap.c:11554 zap_restart: Reload channels from zap config failed! This and more is from my previous message (sorry, that didn't just contain configuration information). Thanks, Jaap _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users