Hi guys, I need to interconnect an asterisk server (1.4.17) with an alcatel pbx, because i want that an asterisk extension can call an alcatel extension and viceversa. I need to do this throug a NT port (of the digium card) for technical reasons (linked with alcatel hardware).
Card installation was fine, but i'm not sure of the configuration i choose. In /etc/misdn-init.conf i put my port 1 as nt_ptp with "nt_ptp=1", the other port are configured in te_ptp mode. Obviously port 1 jumper is set in NT mode. In /etc/asterisk/misdn.conf i put this: [out] ports=1,2,3,4 context=from-pstn msns=* imho, this is the wrong configuration, because i put together NT and TE ports in the same context...how can i fix this? Have i to create another context only for NT port? Moreover, if in asterisk CLI i run "misdn show config 1", i get "port 1 is not active". So, how can i enable port 1 in NT mode? many thanks - Daniele _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
