Hi all, I still haven't seen my first post (cry for help) so I'm not sure if these are going through or not ...
I've played with the box all day today ... I got it to quit seg faulting finally by playing with the config files. Currently I have 4 spans configured for a Digium TE420B (With Octastic DSP) Here is my zaptel.conf: (I know the device connected to spans 1-3 are providing clock but I don't know about span 4 so I have no idea if I set these right) span 1,1,0,css,hdb3,crc4 span 2,1,0,css,hdb3,crc4 span 3,1,0,css,hdb3,crc4 span 4,1,0,cas,hdb3 bchan=1-15,17-31 dchan=16 # bchan=32-46,48-62 dchan=47 # bchan=63-77,79-93 dchan=78 # #R2 span cas=94-108:1111 cas=110-124:1111 I'm in Iraq and they use Chinese Huawei switches throughout the country which is why I used 1111 instead of 1101 but I've tried that too and haven't seen a difference yet (could have other problems though) Do I need to specify a dchan=109 for the R2 span? I don't have one setup currently as the example didn't list a dchan setting for R2. The first 3 spans are euro isdn and zapata.conf is: switchtype = euroisdn signalling = pri_cpe context=incoming group = 1 channel => 1-15,17-31 ; group = 2 channel => 32-46,48-62 ; group = 3 channel => 63-77,79-93 My unicall.conf is: context=incoming protocolclass=mfcr2 protocolvariant=cn,20,7 ; protocolend=cpe ; group = 4 channel => 94-108,110-124 When Asterisk comes up, in the CLI I get notices for channels 94-124. Unicall/94 says event Far end unblocked followed by Unicall/94 event Local end unblocked and this messages repeats for the rest of the channels. I try to dial out with Dial(zap/g4/<phone number>) but I got an error so I looked at chan_unicall.c and saw something I thought I'd try then I changed it to: Dial(unicall/g4/<phone number>) which then brings up: WARNING[21155]: chan_unicall.c:3023 do_monitor: Unicall/94 Whoa.... I'm owned but found (11) in read [0x825e788, 0x825e788]... NOTICE[21184]: chan_unicall.c:2504 handle_uc_event: Unicall/94 event Dialing NOTICE[21184]: chan_unicall.c:2504 handle_uc_event: Unicall/94 event Protocol failure ERROR[21184]: chan_unicall.c:2508 handle_uc_event: Unicall/94 protocol error. Cause 32776 WARNING[21184]: app_dial.c:738 wait_for_answer: Unable to forward voice or dtmf ... then it hangs up. If you've read this far you have probably figured that I have no idea what I'm doing! I'm at the mercy of this fine group to show me the error of my ways. If I have forgotten to post data that would help ... just let me know. I have no clue how to debug this but I'm trying to figure it out. My PRI ISDN spans work though and I can make/receive calls on them so I know I'm not totally in the weeds. Regards, Brian
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
