Pretty easy actually. ----------------- zaptel.conf ------------------------ span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16
---------------- zapata.conf ---------------------- usecallerid=yes hidecallerid=no echocancel=yes echocancelwhenbridged=yes echotraining=800 relaxdtmf=yes rxgain=-3.0 txgain=-6.0 busydetect=yes busycount=8 immediate=no switchtype=qsig group=0 signalling=pri_net channel => 1-15,17-31 You may need to set signalling to pri_cpe depending on how your Alcatel is configured. This is a working configuration from an Asterisk <--> NEC NEAX7400 ICS system. (You may not need busy detection - the only reason I have it enabled is because there are a couple of analogue lines connected to the NEC without hangup detection) voip crazy wrote: > Hello all, > > I need to conect an Asterisk with an Alcatel OmniPBX 4400 using an E1 > port. > It is the first time I make this kind of connection and I do not know > exactly how to get it working. > Someone has experience with this kind of connection? > Could you paste a zapata.con and zaptel.conf files with QSIG > configuration? > Any clue will be wellcomed. > > Thanks > > Voipcrazy > > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
