Thanks Chad. This config seemed to have worked a bit. I don't get the "Unprovisioned" or "Error Verifying Config Info" messages anymore. However, the phone sits at "Registering" and will never register.
I took a look at the sip debug and I see the below messages. Do I need to enable NAT in the SEP.cnf.xml file since I am behind NAT? I know my 7960 config file has natEnabled = 1. Scheduling destruction of call '[EMAIL PROTECTED]' in 15000 ms <-- SIP read from <MY HOME IP ADDRESS>:49157: REGISTER sip:<TB IP ADDRESS> SIP/2.0 Via: SIP/2.0/UDP <MY HOME IP ADDRESS>:1140;branch=z9hG4bK48e89c16 From: <sip:86003@<TB IP ADDRESS>>;tag=0018195aa6770003efaf5095-54a486b0 To: <sip:86003@<TB IP ADDRESS>> Call-ID: [EMAIL PROTECTED] Max-Forwards: 70 Date: Mon, 08 Oct 2007 23:42:08 GMT CSeq: 101 REGISTER User-Agent: Cisco-CP7961G/8.3.0 Contact: <sip:86003@<HOME IP ADDRESS>:1140;transport=udp>;+sip.instance="<urn:uuid:00000000-0000-0000-000 0-0018195aa677>";+u.sip!model.ccm.cisco.com="30018" Supported: (null),X-cisco-xsi-6.0.2 Content-Length: 0 Reason: SIP;cause=200;text="cisco-alarm:25 Name=SEP0018195AA677 Load=SIP41.8-3-3SR2S Last=initialized" Expires: 3600 --- (14 headers 0 lines) --- Using latest REGISTER request as basis request Sending to <HOME IP ADDRESS> : 1140 (non-NAT) Transmitting (no NAT) to <HOME IP ADDRESS>:1140: SIP/2.0 404 Not found Via: SIP/2.0/UDP <HOME IP ADDRESS>:1140;branch=z9hG4bK48e89c16;received=<HOME IP ADDRESS> From: <sip:86003@<TB IP ADDRESS>>;tag=0018195aa6770003efaf5095-54a486b0 To: <sip:86003@<TB IP ADDRESS>>;tag=as1886ecd1 Call-ID: [EMAIL PROTECTED] CSeq: 101 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Content-Length: 0 On 1/25/08 10:29 AM, "Chad Osmond" <[EMAIL PROTECTED]> wrote: > Try this configuration file... > > http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configu > ration+files+for+SIP#Cisco7961with833SR2ConfigurationExamples > > > Chad > ________________________________ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Gregory > Wong > Sent: Friday, January 25, 2008 6:36 AM > To: [email protected] > Subject: [asterisk-users] Unprovisioned 7961 > > > Hi Everyone, > > I am having some issues getting my 7961 working with Trixbox. I have > loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes > into an unprovisioned state. A status message shows up and says "Error > Verifying Config Info". > > I have read quite a bit on this topic (getting 7961's to work with > Asterisk and TB) and only came across a few postings where other people > encountered this issue but no solution was given. I have checked the > SEP.cnf.xml file for the phone and everything seems to be right. I even > tried to remove some parts of the code as people suggested but no luck. > I already have a 7960 on TB so I know that TFTP is working correctly. > > Any ideas on how I can get this to work would be much appreciated. > > Thank. > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
