Hi all
I have a small problem here. I asked this question on another asterisk
mailing list, but nobody seemed to be able to help me there.
We are running
* Asterisk 1.4.17
* Libpri 1.4.3
* Zaptel 1.4.8
on a 1.6 dual core, 2GB ram and a digium TDM800P wildcard, hardware echo
cancelation and a quad FXO card.
We have 4 analog lines, one of which is a Cellphone line for least cost
routing.
The problem I am having is dialing out using DTMF signalling. At the
moment I am making do with Pulse dialing through the 3 analog lines. I
can recieve calls on the Cellphone line without any problems, but cant
dial out through it, as a cellphone cant do pulse dialing. I have run
"ztmonitor 1 -f gains", where 1 is the zap channel where the cellphone
is located, while dialing the number 072 031 1294. I then went to
audacity, on my own pc, and converted the raw file into mp3 format,
which is available for download at
http://www.iancoetzee.za.net/tone_dial.mp3. After listening to the
playback I concluded that the DTMF signals being sent is totally wrong.
The relevant pieces of my configs are below
Your help in this matter will be greatly apreciated.
Regards
Ian
--
www.vddi.co.za <http://www.vddi.co.za/>
I Coetzee
IT Technician
Telephone : 012 664 2300
Cellphone : 079 522 6519
Fax : 012 644 2902
E-mail : [EMAIL PROTECTED]
Skype : vddb_igcoetzee
*/etc/asterisk/zapata.conf*
; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
;;; line="1 WCTDM/0/0"
;Cellphone
signalling=fxs_ks
callerid=asreceived
context=incoming_calls
callerid=
group=2
busydetect=yes
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
pulsedial=no
callprogress=yes
busycount=5
toneduration=500
subscribecontext=GXP_BLF
overlapdial=no
channel => 1
;;; line="2 WCTDM/0/1"
;Landline
signalling=fxs_ks
callerid=asreceived
context=incoming_calls
callerid=
group=1,2
busydetect=yes
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
pulsedial=yes
callprogress=yes
busycount=5
toneduration=300
subscribecontext=GXP_BLF
channel => 2
*/etc/zaptel.conf*
# Autogenerated by /usr/sbin/zapconf on Wed Jan 16 12:23:09 2008 -- do
not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
fxsks=1
fxsks=2
fxsks=3
fxsks=4
# channel 5, WCTDM/0/4, no module.
# channel 6, WCTDM/0/5, no module.
# channel 7, WCTDM/0/6, no module.
# channel 8, WCTDM/0/7, no module.
# Global data
loadzone = za
defaultzone = za*
*
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
