I think I have my echo problem solved, now i need to tackle the MWI. I can't seem to get it to light up. I'm using Asterisk 1.4.14. Here's a section from my sip.conf for my test phone:
[general] context=internal allowguest=no allowoverlap=no allowtransfer=yes notifyhold=yes bindport=5060 bindaddr=0.0.0.0 srvlookup=yes pedantic=yes [EMAIL PROTECTED] ;vmexten=*97 disallow=all allow=ulaw allow=ilbc mohinterpret=default mohsuggest=default language=en useragent=TCTC PBX ;dtmfmode = info fromdomain=10.10.60.253 ;relaxdtmf=yes [15] username=15 host=dynamic type=friend context=internal secret=edited-out subscribecontext=internal dtmfmode=rfc2833 ;defaultip=10.10.60.246 mailbox=15 ;subscribemwi=yes notifymimetype=text/plain checkmwi=10 [EMAIL PROTECTED] disallow=all allow=ulaw All of my sip phones exist in the "internal" context and I have the appropriate extensions (I think) set up. In my voicemail.conf I have an [internal] section with the mailbox 15 defined with password 1234. I can make and receive calls from the phone, but the SIP phone does not light up. The phone is running firmware version 7.1.30, Not sure what goes in the "mailbox" line of the sip identity on the phone. With "sip set debug peer 15" on the Asterisk CLI I don't see any "Notify" messages go by. I've been searching google for about 2 days on this and haven't come up with anything useful yet. Everything I see indicates it should "just work". Thanks, Brent Davidson _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
