Johannes von Drachenfels wrote:
Hi,
i have a Siemens Gigaset phone with clip-capabilities on the tdm400 with extension 610 installed. Extension 600 is another phone. But i still cannot see the number of the caller at the display of the Siemens phone... here is my config:
; Main extension exten => 600,1,SetCallerID,${CALLERIDNUM} exten => 600,2,Dial,Zap/33|30
; Johannes von Drachenfels's Extension exten => 610,1,SetCallerID,${CALLERIDNUM} exten => 610,2,Dial,Zap/32|30 exten => 610,3,VoiceMail,u610 exten => 610,103,VoiceMail,b610
... and the debug of a call from 600 to 610:
cm*CLI> -- Starting simple switch on 'Zap/33-1' -- Executing SetCallerID("Zap/33-1", "600") in new stack -- Executing Dial("Zap/33-1", "Zap/32|30") in new stack -- Called 32 -- Zap/32-1 is ringing -- Zap/32-1 is ringing -- Zap/32-1 is ringing
So what i would like to see is 600 in the display of 610 ...
Hi,
I have CID working fine on TDM400s with Gigasets. I do not have the SetCallerID lines in my extensions.conf.
You need to add a line in zapata.conf
usecallerid=yes
above your TDM400 channel declarations which also have the caller ID info.
Here is part of mine:
usecallerid=yes busydetect=no
group=2 context=default signalling=fxo_ks threewaycalling=yes transfer=yes cancallforward=yes
callerid="Avid" <500> channel => 3
callerid="Terry" <501> channel => 4
Hope this helps.
Richard
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
