Hi Amit OK, the majority of our calls go out via zaptel fxo and pstn lines. When these are all busy, calls are routed via a VOIP provider here in the UK. All activity is recorded in our logs, and I can find no trace of either 999 or 112 (if since been reminded that in the UK, you can now also use 112 which is consistent with continental Europe). I can't find a call placed at the relevant time that had these numbers, even as mid-part of a string. Below is the part which deals with our external calls. As you can see, calls are routed out via zap, or VOIP (that's the gradwell bit). If someone prefixes a call with "9" it forces it our via VOIP and if someone dials "999" it is intercepted and sent via the zap channels. If no zap channel is free, a call on channel 1 is ended and the number re-dialled. This makes sure that emergency calls can always be placed on a landline.
Any ideas would be appreciated! Phil [softoption-zap] exten => _0[123456789].,1,NoOp(${EXTEN}) exten => _0[123456789].,2,Dial(Zap/g0/${EXTEN},,j) exten => _0[123456789].,103,Dial(IAX2/Gradwell/44${EXTEN:1},,) exten => _00[1-9].,1,Dial(IAX2/Gradwell/${EXTEN:2},,) exten => _90[123456789].,1,Dial(IAX2/Gradwell/44${EXTEN:2},,) ; The below section will allow for 3 digit BT numbers to be called, by prefixing them with 9 ; For example: 154 is BT Business Faults - dial 9154 exten => _9[123456789]XX,1,NoOp(${EXTEN}) exten => _9[123456789]XX,2,Dial(Zap/g0/${EXTEN:1},,j) ; The below section will allow for 999 Emergency calls to be made. This will FORCE these calls ; over our BT lines, which will provide CallerID and location information to the Emergency Operator ; If there are no BT lines free, it will force a call to end and then dial exten => 999,1,NoOp(999) exten => 999,2,Dial(Zap/g0/999,,j) exten => 999,3,Hangup() exten => 999,102,SoftHangup(Zap/1-1) exten => 999,103,Wait(1) exten => 999,104,Goto(1) [softoption-gradwell] exten => _00[1-9].,1,Dial(IAX2/Gradwell/${EXTEN:2},,) exten => _0[123456789].,1,Dial(IAX2/Gradwell/44${EXTEN:1},,) exten => _[1-9]XXXXX,1,Dial(IAX2/Gradwell/441353${EXTEN},,) ________________________________ From: amit salunkhe [mailto:[EMAIL PROTECTED] Sent: 14 February 2008 07:44 To: Phil Knighton Subject: UK -999 dialing issue HI Phil Can u send me ur out call context config. Also tell me what ur using with Asterisk to make out call SIp-Voip or Pstn line with Fxo card? also check with this command in ur Asterisk console. sip show peers so u can get anybody from out side place such call inbehalf of u. check who & how many user regsiter with ur Asterisk. if ur using FXO card then also there is chance to check this. also use Mysql for CDR table tocheck who try to call at time. so u got any hint for this Regards Amit _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users