Joshua Kinard wrote: > So I'm trying to work on this complex fax server setup, and part of it > involves connecting my asterisk server to my Rolm CBX switch, via a T1 line. > I plan on using Asterisk simply as a T1-PRI Bridge to IAXmodem (which in > turn, activates HylaFax+ to handle the faxing). So far, though, I don't > think I'm getting 100% of the way there. When dialing the fax extension from > my Rolm phone, I get several seconds of silence followed by error tone. But > on asterisk's CLI, I see this: > > -- Starting simple switch on 'Zap/2-1' > -- Starting simple switch on 'Zap/3-1' > -- Starting simple switch on 'Zap/4-1' > -- Starting simple switch on 'Zap/1-1' >
So, okay, there are four calls coming in on the Zap (strange, but...) > -- Executing [EMAIL PROTECTED]:1] Dial("Zap/2-1", > "IAX2/iaxmodem0/s|10|r") in new stack > -- Called iaxmodem0/s > -- Call accepted by 127.0.0.1 (format ulaw) > -- Format for call is ulaw > -- IAX2/iaxmodem0-5 is ringing > -- IAX2/iaxmodem0-5 answered Zap/2-1 > iaxmodem0 correctly takes the first call... > -- Executing [EMAIL PROTECTED]:1] Dial("Zap/3-1", > "IAX2/iaxmodem0/s|10|r") in new stack > -- Called iaxmodem0/s > [Feb 15 15:40:22] WARNING[24329]: chan_iax2.c:7542 socket_process: Call > rejected by 127.0.0.1: Busy > -- Hungup 'IAX2/iaxmodem0-1' > == Everyone is busy/congested at this time (1:0/0/1) > == Auto fallthrough, channel 'Zap/3-1' status is 'CHANUNAVAIL' > -- Executing [EMAIL PROTECTED]:1] Dial("Zap/4-1", > "IAX2/iaxmodem0/s|10|r") in new stack > -- Called iaxmodem0/s > [Feb 15 15:40:30] WARNING[24327]: chan_iax2.c:7542 socket_process: Call > rejected by 127.0.0.1: Busy > -- Hungup 'IAX2/iaxmodem0-3' > == Everyone is busy/congested at this time (1:0/0/1) > == Auto fallthrough, channel 'Zap/4-1' status is 'CHANUNAVAIL' > -- Hungup 'Zap/3-1' > -- Executing [EMAIL PROTECTED]:1] Dial("Zap/1-1", > "IAX2/iaxmodem0/s|10|r") in new stack > -- Called iaxmodem0/s > [Feb 15 15:40:35] WARNING[24327]: chan_iax2.c:7542 socket_process: Call > rejected by 127.0.0.1: Busy > -- Hungup 'IAX2/iaxmodem0-4' > == Everyone is busy/congested at this time (1:0/0/1) > == Auto fallthrough, channel 'Zap/1-1' status is 'CHANUNAVAIL' > -- Hungup 'Zap/4-1' > And the other calls get busy and improperly run through the auto fallthrough process (you *need* a Hangup in your dialplan fax-in context). > The Rolm gives me error tone just before the "Starting simple switch" > messages begin to appear, so it's almost like the Rolm is not waiting around > long enough for the asterisk server to answer, before it jumps to the next > configured T1 channel, runs out of channels (I only configured four in the > Rolm and on asterisk). > I think that your zaptel/zapata configuration between the Rolm and Asterisk on that T1 is misconfigured. Set it up for PRI if you can... it'll be a lot easier, is my guess. Thanks, Lee. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users