Hi list, Hopefully, some of our Dutch members can help with this one. I'm also based in the Netherlands and am using a Sipura (Linksys) SPA-3000 (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test system. It works fine, except that the Called ID (CID) is not working. I'm aware that KPN (our local telco) requires a separate subscription to activate CID on POTS lines and I've confirmed that is working. Yet, I've not been able to get the SPA-3000 to pas the CID on to Asterisk, and I know of no relevant SPA-3000 settings for doing this other than:
* Regional Miscellaneous Caller ID Method: ETSI DTMF with PR * PSTN Line PSTN-To-VoIP Gateway Setup PSTN CID For VoIP CID: yes As some have suggested, I've also set the Regional / Miscellaneous / Caller ID FSK Standard: to 'bell 202', but this seems like nonsense to me as it should not make a difference once you've selected a DTMF CID method. I've also experimented with increasing the answer and ring-through delays, but this makes no difference. I've been told that this is because KPN always sends the CID on ahead of the rest of the call to begin with. Could it be that I'm missing something? Thanks, Jaap _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users