John Novack wrote:
>
> sean darcy wrote:
>> Calling out on PSTN over a TDM400P seems to generate a Red Alarm -
>> whatever that is.
> Red Alarm USED to mean there was no battery on the line - assume this
> references an FXO port connected to a PSTN POTS line.
>
Yes.
> Is it possible Channel 4 is not connected?
>
But:
>> Sometimes it works, and then doesn't:
>>
>> .............
>> -- Starting simple switch on 'Zap/2-1'
>> -- Executing [EMAIL PROTECTED]:1] Answer("Zap/2-1", "") in new stack
>> -- Executing [EMAIL PROTECTED]:2] Set("Zap/2-1", "CALLERID="house"
>> <2038447>") in new stack
>> -- Executing [EMAIL PROTECTED]:3] Dial("Zap/2-1", "Zap/4/6378447")
>> in new stack
>> -- Called 4/6378447
>> -- Zap/4-1 answered Zap/2-1
>> -- Native bridging Zap/2-1 and Zap/4-1
>> -- Hungup 'Zap/4-1'
>> == Spawn extension (internal, 6378447, 3) exited non-zero on 'Zap/2-1'
>> -- Hungup 'Zap/2-1'
>> -- Starting simple switch on 'Zap/2-1'
>> -- Executing [EMAIL PROTECTED]:1] Answer("Zap/2-1", "") in new stack
>> -- Executing [EMAIL PROTECTED]:2] Set("Zap/2-1", "CALLERID="house"
>> <2038447>") in new stack
>> -- Executing [EMAIL PROTECTED]:3] Dial("Zap/2-1", "Zap/4/2560597")
>> in new stack
>> -- Called 4/2560597
>> [Feb 24 17:56:55] WARNING[9024]: chan_zap.c:4424 zt_handle_event:
>> Detected alarm on channel 4: Red Alarm
>> ........
sean
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
