Have you set the VLAN tag on the phone? CP
Lee, John (Sydney) wrote: > Hi all, > > I have been googling and testing without any luck and would appreciate > any guidance from anyone. > > A port has already been configured on the CISCO switch with the > following: > interface FastEthernet2/0/1 > description VOIP VLAN 100 > switchport access vlan 100 > switchport mode access > duplex full > speed 100 > > I plugged the phone into the port and everything worked as far as VOIP > is concerned. > > Then I plug a PC into the PC port of the Polycom phone with the hope > that I only need one port to support 2 devices. > (I wanted the VOIP phone to use VLAN 100 and PC just the native VLAN) > > PROBLEM: However, I found that I could not get the PC (using DHCP) to > get an IP address at all. It seems to be that the traffic from the PC is > also tagged as VLAN 100 as well. > I was told by others that there is a setting on the Polycom phone which > allows the traffic of the PC, under this type of settings, to go native. > > Can anyone please help? > > Thanks. > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users