SPA1001 is 1FXS only. SPA3102 is 1FXS + 1FXO... if you don't need FXO why not get the SPA2102? It should be cheaper and you have the extra port for future use.
On Sat, Mar 15, 2008 at 12:08 AM, Thermal Wetland <[EMAIL PROTECTED]> wrote: > That is good to know. > > I will be using the the device to connect a bunch of analog phones back to a > centralized server. > > Since each office has only one ethernet connection do I want to: > 1. Install a small switch to let a SPA1001 & PC use the one drop > 2. Install a SPA3102 to let the PC share the one drop > > Even with an extra patch cord and probably the occasional power strip number > one will be cheaper, but #2 seems like a better way to go. > > -Thermal > > > > On Fri, Mar 14, 2008 at 6:41 PM, <[EMAIL PROTECTED]> wrote: > > its not a bad device - I have 2 problems with it. It doesn't do echo > cancellation very well & is particularly badly matched to the PSTN here in > Oz. Hint: keep it well cooled - echo goes up badly when its hot& it runs > very hot if there is no ventilation. I use the 3102 to bridge a mythtv box > instead of putting in an extra switch - works except for the occaisional > failure to get a dhcp address. I use a linux gateway for dhcp, most devices > (3102+mythtv box, lynksys PAP2, bt100 ip phones, wireless and hosts) are all > dhcp > > > > -----Original Message----- > > > > From: "Thermal Wetland" <[EMAIL PROTECTED]> > > Subj: Re: [asterisk-users] Anyone know of a pass through ATA > > Date: Sat 15 Mar 2008 10:23 > > Size: 2K > > To: [EMAIL PROTECTED], "Asterisk Users Mailing List - Non-Commercial > Discussion" <[email protected]> > > > > That is awesome. I dont know why the manual doesnt mention that. > > > > I want to have the device use a static IP & the computer use DCHP from a > central DHCP server...sounds like it wont be a problem. > > > > > > Thanks. > > > > On Thu, Mar 13, 2008 at 8:14 PM, W.Kenworthy <[EMAIL PROTECTED]> wrote: > > sipura 3102 set to bridge. Works but I find that when rebooting a PC > > bridged it sometimes (randomly) doesnt get a dhcp lease, necessitating a > > powercycle of the 3102. I think the PC drops the ethernet as it reb > > oots and the sipura doesnt recognise it coming back. > > > > BillK > > > > > > > > On Thu, 2008-03-13 at 19:59 -1000, Thermal Wetland wrote: > > > Anyone know of a company that makes a pass through ATA? > > > > > > By pass through I mean have an Ethernet switch built into the ATA, > > > like most desktop phones have. > > > > > > All of the dual ethernet ATAs I have seen have WAN/LAN ports, not two > > > LAN ports. > > > > > > I fooled around with DMZ etc...but it just doesnt work as well. > > > > > > > > > > > > Thermal > > > > > > > _______________________________________________ > > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > > > asterisk-users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
