Hi, I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there are 3 BT lines connected directly to these ports.
One of the lines has BT FeatureLine Compact and this is the line I am having problems with, the other 2 lines are working perfectly, detecting CID, answering incoming calls and placing external calls via SIP devices. I am receiving a error log entry: chan_zap.c: Ring/Off-hook in strange state 6 on channel 1 Incoming calls are detected by asterisk, however answering the SIP devices does not answer the call, and placing a call via line one does nothing, just silence. I contacted BT about it (I know, what was I expecting!) they informed me that I must use the number 9 to access a external number! I have asked them to pass it to the technical department to see if they have any input. Is there someother signalling I should be using to detect the incoming calls on a BT FeatureLine? I have tried Groudstart but asterisk fails to load chan_zap due to: Mar 18 14:01:26 ERROR[28951] chan_zap.c: Signalling requested on channel 1 is FXS Groundstart but line is in FXS Kewlstart signalling Mar 18 14:01:26 ERROR[28951] chan_zap.c: Unable to register channel '1' Any help, or ideas on what to try? Thanks PaulG. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users