As with any debugging, you should try steps seperately... ----- Original Message ----- From: "PBX" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 18, 2003 10:42 PM Subject: [Asterisk-Users] SIP / X-ten Softphone
> [1005] > type=friend > secret=1005 > host=dynamic > mailbox=1005 > context=default Add user=1005 to this sip.conf definition. > > X-Lite Softphone > > Network->Out Bound SIP Proxy: (IP of *) > > SIP Proxy->Default->Enabled: Yes > SIP Proxy->Default->UserName: 1005 > SIP Proxy->Default->Password: 1005 > SIP Proxy->Default->Domain/Realm: (IP of *) > SIP Proxy->Default->SIP Proxy: (IP of *) > SIP Proxy->Default->Send Internal IP: Always Take a look at some screenshots of X-Lite configs. I remember there being a line or two that wanted to have :5060 after the IP. As a side note, I gave up on X-Lite. I found it difficult to navigate the configuration menus, and there was a background hum that isn't there if I use sjphone, diax, or iaxcomm/iaxclient. ---- Andrew Thompson http://aktzero.com/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
