That does indeed sound a bit odd. I've run 12-48 FXS ports from a single molex 
connector with Sangoma hardware. Try testing your power supply with a 
multimeter to ensure its putting out the proper voltage. I would not trust the 
extnernal AC adapters as I've found they typically have voltage that is too 
low...

Tim Nelson
Systems/Network Support
Rockbochs Inc.

----- Original Message -----
From: "Todd" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<[email protected]>
Sent: Tuesday, April 1, 2008 8:20:36 PM (GMT-0600) America/Chicago
Subject: [asterisk-users] FXS, Power and Sangoma

Hi
   I've a Sangoma A200D with 2FXO and 2FXS.  When using it with only  
the FXO module, it's all good.  But when I put in the FXS module and  
connect the power, logs tells me not enough power.

> Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1:  
> Failed to powerup within 600 ms (8V : 72V)!
> Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did  
> you remember to plug in the power cable?


So I disconnect other power devices in the box (Dell Optiplex GX270)  
such as the Zip drive and CDROMs, but no luck.  Then I took an  
external power supply with molex connector 
(http://www.coolerguys.com/840556029977.html 
  or http://www.cablesonline.com/mo4inpotoacp.html) and tried that  
with still the same thing.

How much power does this card need?  The AC adapter puts out up to 2  
Amps.  Sangoma support is only telling me to get a bigger power supply  
and don't use the AC adapter.  Has anyone else seen this issue?  Could  
something else be wrong?
  thanks
    Todd

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to