>Did you ifdown the dynamic interfaces first ? > >Martin Yes, this still results in a crash on the box with the tor2.
Is there any 'controlled' way to bring down a dynamic span? ... just for fun here is zttool (spans 3 & 4 are unused)... Alarms Span OK Tormenta 2 (PCI) Quad T1 Card 0 Span 1 OK Tormenta 2 (PCI) Quad T1 Card 0 Span 2 RED Tormenta 2 (PCI) Quad T1 Card 0 Span 3 RED Tormenta 2 (PCI) Quad T1 Card 0 Span 4 OK Dynamic 'eth' span at 'eth0/00:0A:5E:05 ... and from zaptel.conf... span=1,2,0,esf,b8zs span=2,1,0,esf,b8zs dynamic=eth,eth0/00:0A:5E:05:7E:89,24,0 > On Wed, 2003-12-17 at 10:36, john wrote: > > Hi, > > > > I have just begun working with TDMoE running between 2 fiber nics the > > dynamic span works great. In my main asterisk box's startup file I just > > 'modprobe tor2', then start asterisk. The zaptel, ztdynamic & ztd-eth > > modules all load by themselves when tor2 is loaded. If I stop asterisk then > > 'modprobe -r tor2' the tor2 module is removed but the other three remain. > > If I then 'modprobe -r ztd-eth' it causes a complete lock up on the machine. > > The remote machine does not have any zap hardware in it yet and doesn't have > > these difficulties. > > > > I know I can just restart the machine but it is in a production environment > > (soon to increase from a few to ~30 simultaneous calls) and it is nice to be > > able to make changes and > > cvs update installs without restarting. > > > > Has anyone experienced this or am I just missing a step or going in the > > wrong order? > > Unloading of modules was of such a concern that it almost didn't make it > into newer kernels. So you should probably not unload them. A production > machine should have specified service windows available. Also decent > hardware should be able to reboot fairly fast. The machine I have as our > local asterisk machine can go from reset button to accepting new calls > in under 50 seconds. Our remote machine is around 90 secs. Depending on > y our call volume, and system setup, you should be able to handle this. > > -- > Steven Critchfield <[EMAIL PROTECTED]> > This e-mail was scanned and found clean by Monroe-Woodbury's Antivirus. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
