Did you provide power to the card? FXS extensions need power. On Fri, 2008-04-11 at 08:11 +0300, Murithi Martin wrote: > Hi Guys, > I have a TDM400P (2FXS and 2FXO) installed on my asterisk (1.4.18.1) > Zaptel (1.4.9.2) running on Fedora Core 7, below are my configurations > and some diagnosis I did. The problem is when I connect an analogue > phone on either of the FXS channels I don't get a dialtone, I can't > call any of the sip clients or even call my echo test, number, which > is an context included in that of the FXS port. > How can I solve this problem? Please assist. > > After doing a /sbin/ztcfg -vv, after listing the zaptel channels > configuration it says 4 channels to configure instead of 4 channels > configured. is there any additional configuration or dependency I need > to load (I've done modprobe wctdm and modprobe zaptel before doing > /sbin/ztcfg -vv). > > > zaptel.conf > # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER) > fxoks=1 > fxoks=2 > fxsks=3 > fxsks=4 > > # Global data > > loadzone = us > defaultzone = us > > > zapata.conf > [trunkgroups] > ; define any trunk groups > > [channels] > ; hardware channels > > ;language=en > ;context=from-zaptel > ;signalling=fxs_ks > ;rxwink=300 ; Atlas seems to use long (250ms) winks > ; > ; Whether or not to do distinctive ring detection on FXO lines > ; > usedistinctiveringdetection=yes > ; default > usecallerid=yes > hidecallerid=no > callwaiting=no > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=no > ;echotraining=800 > echotraining=yes > rxgain=0.0 > txgain=0.0 > > ;group=0 > callgroup=1 > pickupgroup=1 > immediate=no > context=phone > signalling=fxo_ks > channel => 1 > ;callerid= > ;mailbox= > ;group= > context=phone > > ;;; line="2 WCTDM/0/1 FXOKS (In use)" > signalling=fxo_ks > ;context=phone > channel => 2 > ;callerid= > ;mailbox= > ;group= > context=incoming > > ;;; line="3 WCTDM/0/2 FXSKS (In use)" > signalling=fxs_ks > ;callerid=asreceived > ;group=0 > channel => 3 > context=incoming > > ;;; line="4 WCTDM/0/3 FXSKS (In use)" > signalling=fxs_ks > ;callerid=asreceived > ;group=0 > ;context=incoming > channel => 4 > ;context=default > > > > [EMAIL PROTECTED] /]# /sbin/ztcfg -vv > > Zaptel Version: 1.4.9.2 > Echo Canceller: MG2 > Configuration > ====================== > > > Channel map: > > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > Channel 03: FXS Kewlstart (Default) (Slaves: 03) > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > 4 channels to configure. > > > > > Asterisk CLI > core score show channeltypes > Type Description Devicestate Indications Transfer > ---------- ----------- ----------- ----------- -------- > Feature Feature Proxy Channel Driver no yes no > IAX2 Inter Asterisk eXchange Driver (Ver 2) yes yes yes > Local Local Proxy Channel Driver yes yes no > SIP Session Initiation Protocol (SIP) yes yes yes > Phone Standard Linux Telephony API Driver no yes no > MGCP Media Gateway Control Protocol (MGCP) yes yes no > Agent Call Agent Proxy Channel yes yes no > ---------- > 7 channel drivers registered. > > *CLI> module reload chan_zap.so > No such module 'chan_zap.so' > > *CLI> -- Faraz R Khan Chief Architect Emergen Consulting Pvt Ltd +92.21.111.111.320 x200 www.emergen.biz
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
